Top 21 Tungsten Electrodes

 

WeldingCity 10-pk Premium TIG Welding Tungsten Electrode Rod 20 Thoriated Red EWTh20 332 x 7  10-pcs
WeldingCity 10-pk Premium TIG Welding Tungsten Electrode Rod 2.0% Thoriated (Red, EWTh20) 3/32″ x 7″ | 10-pcs
WeldingCity 10-pk Premium TIG Welding Tungsten Electrode Rod 2.0% Thoriated (Red, EWTh20) 3/32″ x 7″ | 10-pcs - All relevant tig parts (2nd picture) working with these electrodes are available from our store to select correct tungsten electrode please refer to the listed chart (3rd picture for reference only). Aws specification ewth20 conform to ansi/aws standard a512m/a5122009 iso 68482004 mod. 3/32″ (24mm) diameter by 7″ (175mm) length ground annealed. Us based welding supplier strong technical support with experienced customer service to address buyer’s any question msds available per request. 10-pcs premium quality tig welding tungsten electrodes (3/32″) 20% thoriated (red, ewth20-332).

 

TIG Welding Tungsten Electrodes Rare Earth Blend 332 x 7 Purple EWG 10-Pack
TIG Welding Tungsten Electrodes Rare Earth Blend 3/32″ x 7″ (Purple, EWG) 10-Pack
TIG Welding Tungsten Electrodes Rare Earth Blend 3/32″ x 7″ (Purple, EWG) 10-Pack - Premium ten (10) pack of purple ewg rare earth blend tungsten rods for tig welding. Free materials safety data sheet (msds) and certificate of conformance provided below in the product information, adhering to american welding society standard a512m/a5122009. United states based manufacturing & customer service staff are here to help you. Highest rated and most reviewed tungsten electrodes on amazon comparable to e3 tungsten. Electrode size 3/32″ x 7″ or 24mm x 175mm contains 9834% tungsten, 15% lanthanum, 008% zirconium, and 008% yttrium.

 

TEN-HIGH TIG Tungsten Electrodes Cerium 2 WC20Grey Cerium Tungsten Electrode 16mm x175mm 10pcs pack
TEN-HIGH TIG Tungsten Electrodes, Cerium 2%, WC20(Grey) Cerium Tungsten Electrode, 1.6mm x175mm 10pcs pack.
TEN-HIGH TIG Tungsten Electrodes, Cerium 2%, WC20(Grey) Cerium Tungsten Electrode, 1.6mm x175mm 10pcs pack. - It is very popular to be used for the welding of orbital tube, pipe, very samll parts, short welding cycles. Wc20 ceriated tungsten electirode application non-radioactive,for dc welding with low amperage because it starts very easily at low amps and usually requires about 10%less amps to operate than wt20.

 

TIG Welding Tungsten Electrodes 2 Ceriated 332 x 7 Grey WC20 10-Pack
TIG Welding Tungsten Electrodes 2% Ceriated 3/32″ x 7″ (Grey, WC20) 10-Pack
TIG Welding Tungsten Electrodes 2% Ceriated 3/32″ x 7″ (Grey, WC20) 10-Pack - Free materials safety data sheet (msds) and certificate of conformance provided below in the product information, adhering to american welding society standard a512m/a5122009. Highest rated and most reviewed tungsten electrodes on amazon. United states based manufacturing & customer service staff are here to help you. Premium ten (10) pack of grey ewce-2 2% ceriated tungsten rods for tig welding. Electrode size 3/32″ x 7″ or 24mm x 175mm.

 

TIG Welding Tungsten Electrode Pure Tungsten 332 x 7 Green EWP 10-pk YESWELDER
TIG Welding Tungsten Electrode Pure Tungsten 3/32″ x 7″ (Green, EWP) 10-pk YESWELDER
TIG Welding Tungsten Electrode Pure Tungsten 3/32″ x 7″ (Green, EWP) 10-pk YESWELDER - ● 10-pk premium quality tig welding tungsten electrode pure tungsten (green, wp). ● American welding society standard aws a5. ● Color code green. 4mm x 175mm) ●vacuum packing, no oxidation,long time preservationyou get one box of ten (10) pure tungsten (green, wp) tungsten electrodes at this price. 12m/a5. 122009 conformance ● size 3/32″x7″ length(2.

 

HLRM TIG Welding Tungsten Electrode 2 Lanthanated Tungsten 18 x 7 10 Pcs Blue WL2032
HLRM TIG Welding Tungsten Electrode 2% Lanthanated Tungsten 1/8″ x 7″ 10 Pcs (Blue, WL2032)
HLRM TIG Welding Tungsten Electrode 2% Lanthanated Tungsten 1/8″ x 7″ 10 Pcs (Blue, WL2032) - Advantages excellent arc starting, a low burn-off rate, good arc stability, and excellent re-ignition characteristics. Premium ten (10) pack of blue ewla-2 2% lanthanated tungsten rods for tig welding. Pack 10 blue tungsten electrode rods. Suitable for welding steel and stainless steel dc or ac power. Length 7″ (175 mm) diameter 1/8″ (32 mm).

 

TungstenMate Simplicity Tungsten Electrode Grinder Sharpener with Cut Off Slot for TIG Welding Genuine
TungstenMate Simplicity Tungsten Electrode Grinder Sharpener with Cut Off Slot for TIG Welding (Genuine)
TungstenMate Simplicity Tungsten Electrode Grinder Sharpener with Cut Off Slot for TIG Welding (Genuine) - 15° (30° included angle) integrated tungsten sharpening angle. Fits most rotary tools including dremel, black and decker, milwaukee etc. Integrated tungsten cut off port + 3 free diamond wheels. Genuine tungstenmate simplicity designed and precision cnc machined in the usa. 3 hardened steel tungsten guides included 1/16″, 3/32″, 1/8″.

 

CK T187GL2 2 Lanthanated Tungsten Electrode 18 X 7 Pack of 10
CK T187GL2 2% Lanthanated Tungsten Electrode 1/8″ X 7″ Pack of 10
CK T187GL2 2% Lanthanated Tungsten Electrode 1/8″ X 7″ Pack of 10 - 15 piece tig alumina nozzles. This gas lens & collet kits fits all 17 & 26 series air cooled torches and 18 series water cooled torches, including the lincoln pta-17, pta-18 and pta-26 torches, miller diamondback db17,db18 and db 26 torches, along with the weld craft wp-17, wp-18 and wp-26 torches. 12 pieces tig collets and 4 pieces tig gas lens collet bodies. 3 pieces tig back cap and 2 piece tig insulator cup gaskets. 10 pieces 2% lanthanated tungsten electrode wl20 sky bluetip.

 

WeldingCity 10-pk TIG Welding Tungsten Electrode Rod Ceriated 20 Gray 18 X 7 18 Diameter and 7 Length 10-pcsbox
WeldingCity 10-pk TIG Welding Tungsten Electrode Rod Ceriated 2.0% (Gray) 1/8″ X 7″ 1/8″ Diameter and 7″ Length (10-pcs/box)
WeldingCity 10-pk TIG Welding Tungsten Electrode Rod Ceriated 2.0% (Gray) 1/8″ X 7″ 1/8″ Diameter and 7″ Length (10-pcs/box) - Ground annealed comply with ansi/aws a512m/a512 2009 iso 6848 2004 mod. Premium quality tig welding tungsten electrode ceriated 20% (gray) 1/8″ diameter and 7″ length (10-pcs/box). Please provide a usps deliverable address. Diameter 1/8″ (32mm), length 7″ (175mm). You get one (1) box of 10-pcs tig welding tungsten electrode at this price free usps shipping within the us.

 

WeldingCity 10-pk Premium TIG Welding Tungsten Electrode Rod 20 Lanthanated Blue EWLa20 332 x 7  10-pcs
WeldingCity 10-pk Premium TIG Welding Tungsten Electrode Rod 2.0% Lanthanated (Blue, EWLa20) 3/32″ x 7″ | 10-pcs
WeldingCity 10-pk Premium TIG Welding Tungsten Electrode Rod 2.0% Lanthanated (Blue, EWLa20) 3/32″ x 7″ | 10-pcs - Aws specification ewla20 conform to ansi/aws standard a512m/a5122009 iso 68482004 mod. Us based welding supplier strong technical support with experienced customer service to address buyer’s any question msds available per request. All relevant tig parts (2nd picture) working with these electrodes are available from our store to select correct tungsten electrode please refer to the listed chart (3rd picture for reference only). 3/32″ (24mm) diameter by 7″ (175mm) length ground annealed. 10-pcs premium quality tig welding tungsten electrodes (3/32″) 20% lanthanated (blue, ewla20-332).

 

116 Pre-Ground TIG Tungsten Sharpened Electrodes for Welding 5-Pack 2 Thoriated Tungsten Electrode 116 x 15
1/16″ Pre-Ground TIG Tungsten Sharpened Electrodes for Welding 5-Pack (2% Thoriated Tungsten Electrode, 1/16″ x 1.5″)
1/16″ Pre-Ground TIG Tungsten Sharpened Electrodes for Welding 5-Pack (2% Thoriated Tungsten Electrode, 1/16″ x 1.5″) - Material safety data sheet (msds) and material certificate available adhering to american welding society standard a512m/a5122009. Electrode size 1/16″ (16mm) x 15″ (381mm) pre-sharpened to a 20 degree angle taper on both sides, 0010″ tip diameter. Highest quality pre-sharpened tungsten stinger electrodes on amazon. Premium five (5) pack of ewth-2 2% thoriated pre-ground sharpened tungsten electrode rods for tig welding. Used primarily in dc welding, the most commonly used tungsten in the united states.

 

TIG Welding Tungsten Electrodes 2 Ceriated 0040 x 7 Grey WC20 10-Pack
TIG Welding Tungsten Electrodes 2% Ceriated 0.040″ x 7″ (Grey, WC20) 10-Pack
TIG Welding Tungsten Electrodes 2% Ceriated 0.040″ x 7″ (Grey, WC20) 10-Pack - Highest rated and most reviewed tungsten electrodes on amazon. Premium ten (10) pack of grey ewce-2 2% ceriated 0040 tungsten rods for tig welding. Free materials safety data sheet (msds) and certificate of conformance provided upon request electrodes adhere to american welding society standard a512m/a5122009. Electrode size 040″ x 7″ or 10mm x 175mm. United states based manufacturing & customer service staff are here to help you.

 

Alffun 17pcs welder TIG welding torch Collet Body nozzle kit Tungsten electrode for wp-171826 TIG welding torch
Alffun 17pcs welder TIG welding torch Collet Body nozzle kit Tungsten electrode for wp-17/18/26 TIG welding torch
Alffun 17pcs welder TIG welding torch Collet Body nozzle kit Tungsten electrode for wp-17/18/26 TIG welding torch - High quality for a durable and lasting use they have the lowest burn loss rate. Set includes3pcs back cup, 6pcs collet body, 5pcs alumina gas cup/ nozzle, 3pcs zirconiated whitetungsten electrodes. 17pcs tig welding consumables kit suitable all 17 & 26 series air cooled torches and 18 series water cooled torches,including the lincoln pta-17, pta-18 and pta-26 torches, miller diamondback db17,db18 and db 26 torches, along with the weldcraft wp-17, wp-18 and wp-26 torches. Easy to assemble widely compatible with original common tig torch replacement parts. Lanthanated tungsten electrode, with good welding performance.

 

CK T3327GL2 2 Lanthanated Tungsten Electrode 332 X 7 Pack of 10
CK T3327GL2 2% Lanthanated Tungsten Electrode 3/32″ X 7″ Pack of 10
CK T3327GL2 2% Lanthanated Tungsten Electrode 3/32″ X 7″ Pack of 10 - Good d/c arc starts and stability, medium erosion rate, medium amperage range, medium tendency to spit. Radioactive best for use in direct current (d/c) applications using transformer based constant current power sources. 2% thoriated (red) ewth-2/wt20. Principal oxide 17-22% thorium oxide. Best for use on non corroding steels, titanium alloys, nickel alloys, copper alloys.

 

4 Thoriated TIG Welding Tungsten Electrodes 332 x 7 10-Pack
4% Thoriated TIG Welding Tungsten Electrodes 3/32″ x 7″ 10-Pack
4% Thoriated TIG Welding Tungsten Electrodes 3/32″ x 7″ 10-Pack - Top quality 3/32″ 4% thoriated tungsten electrodes for tig welding. Tungsten electrode material 4% thoriated (orange) ewth-4 material conforms to ansi/aws a512, jis, din en 26848, iso 6848. Tungsten electrode size 3/32″ x 7″ or 24mm x 175mm. Top rated ten (10) pack of 4% thoriated tungsten electrodes. Top value savings up to 50% off other marketplace sellers.

 

WeldingCity TIG Welding Tungsten Electrodes ASSORTED Alloying Green-Red-Gray-Gold-Blue and Sizes 116-332
WeldingCity TIG Welding Tungsten Electrodes ASSORTED Alloying Green-Red-Gray-Gold-Blue and Sizes 1/16″-3/32″
WeldingCity TIG Welding Tungsten Electrodes ASSORTED Alloying Green-Red-Gray-Gold-Blue and Sizes 1/16″-3/32″ - 0 , 2. 12 wt20 (ewth-2, 2. 10-pcs assorted alloying and diameters tig welding tungsten electrodes of 1/16″ and 3/32″ diameter. 0% ceriated, gray) wl15 (ewla-1. 0% thoriated, red) wp (ewp, pure, green) wc20 (ewce-2, 2. 0% lanthanated, blue). Size 1/16 and 3/32 diameter 7″ length. 5 , 1. Specification aws a5. Assorted diameters and alloying packages available. 5% lanthanated, gold) wl20 (ewla-2.

 

TIG Welding Tungsten Electrodes 15 Lanthanated 332 x 7 Gold WL15 10-Pack
TIG Welding Tungsten Electrodes 1.5% Lanthanated 3/32″ x 7″ (Gold, WL15) 10-Pack
TIG Welding Tungsten Electrodes 1.5% Lanthanated 3/32″ x 7″ (Gold, WL15) 10-Pack - Free materials safety data sheet (msds) and certificate of conformance provided below in the product information, adhering to american welding society standard a512m/a5122009. Premium ten (10) pack of gold ewla-15 15% lanthanated tungsten rods for tig welding. Electrode size 3/32″ x 7″ or 24mm x 175mm. United states based manufacturing & customer service staff are here to help you. Highest rated and most reviewed tungsten electrodes on amazon.

 

Weldflame Tungsten Electrode WP Pure Green 332-7 24-175mm
Weldflame Tungsten Electrode WP Pure (Green) 3/32″-7″ (2.4-175mm)
Weldflame Tungsten Electrode WP Pure (Green) 3/32″-7″ (2.4-175mm) - 1 pc of each ceramic cup #6 3/8″13n10,10n48. 1 pc of each 13n23,13n28 for wp9/20/25 tig welding torch. This kit contains 10pk wp pure (green) tungsten electrodes for tig welding, 3/32″ (24mm) by 7″ length. You get 16pcs welding parts in total. 1 pc of each 10n24,10n32 for wp17/18/26 tig welding torch.

 

Zirconiated TIG Welding Tungsten Electrodes 332 x 7 10-Pack
Zirconiated TIG Welding Tungsten Electrodes 3/32″ x 7″ 10-Pack
Zirconiated TIG Welding Tungsten Electrodes 3/32″ x 7″ 10-Pack - Top quality 3/32″ zirconiatedtungsten electrodes for tig welding. Top rated ten (10) pack of zirconiated tungsten electrodes. Top value savings up to 50% off other marketplace sellers. Tungsten electrode material zirconiated (brown) ewz-08 material conforms to ansi/aws a512, jis, din en 26848, iso 6848. Tungsten electrode size 3/32″ x 7″ or 24mm x 175mm.

 

Blue Demon TE15L X 316 X 7 Tungsten Electrode 5-Pack
Blue Demon TE15L X 3/16″ X 7″ Tungsten Electrode, 5-Pack
Blue Demon TE15L X 3/16″ X 7″ Tungsten Electrode, 5-Pack - This designation is a tungsten electrode containing 1. 5% of dispersed lanthanum oxide for enhanced arc starting and stability, reduced tip erosion rate, and extended operating current range. 3-1.

 

3mirrors Tungsten Electrode Sharpener Replacement Diamond Wheel Tig Welding 10PCS 25mm
3mirrors Tungsten Electrode Sharpener Replacement Diamond Wheel Tig Welding 10PCS 25mm
3mirrors Tungsten Electrode Sharpener Replacement Diamond Wheel Tig Welding 10PCS 25mm - Weel and sharping system is great to use. This diamond wheel is used for our tungsten electrode sharpener grinder please confirm whether you need 25mm or 35mm wheels before purchase. With good hardness, wear resistance and good impact resistance. Can be used with your rotary tool to cut a wide variety of materials. 10 x 25mm cutting discs 2 x mandrel.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.