Top 15 Best Non Contact Voltages

 

MS88 Digital Multimeter Automatic Range Capacitor Frequency Non-Contact Voltage Detection #ad
MS88 Digital Multimeter Automatic Range Capacitor Frequency Non-Contact Voltage Detection
MS88 Digital Multimeter Automatic Range Capacitor Frequency Non-Contact Voltage Detection #ad - 97 inches package size(l x w x h) 22. Data hold function can be canceled by changing the measurement mode, or push hold key again. Package weight 0. 66 x 5. 4 x 3. 20 x 5. 62 x 1. 634 kg product size(l x w x h) 18. When the live voltage is more than 110v (rms), the sensing indicator will be on and the buzzer will keep sounding as a warning. The buzzer will sound five times before the meter turns off. Press hold key. 00 cm / 8. To enter and exit the data hold mode 1. One second short press returns the meter to normal mode. 00 x 13. 76 inches package contents 1 x multimeter, 2 x test lead, 1 x multifunction socket, 1 x english user maunal. 80 x 9. 00 cm / 7. General functions data hold mode data hold mode makes the meter stop updating the display. 2. 50 x 7. Fixes the display on the current value, symbol h is displayed. 15 minutes idle time. Battery saver the meter will be turned off automatically after approx. Non contact ac voltage detection set rotary switch to the ncv position and hold the meter so that the meter’s top is vertically and horizontally centered and contacting the conductor. 31 x 2.

 

Amprobe ACDC-400 TRMS Digital Clamp Multimeter 400A ACDC with VolTect Non-Contact Voltage Detection #ad
Amprobe ACDC-400 TRMS Digital Clamp Multimeter 400A AC/DC with VolTect Non-Contact Voltage Detection
Amprobe ACDC-400 TRMS Digital Clamp Multimeter 400A AC/DC with VolTect Non-Contact Voltage Detection #ad - Relative zero mode stores a reading in memory to use as a zero point for subsequent readings, allowing quick comparison of multiple readings. True rms (root mean square) sensing meter provides accurate readings when measuring linear or non-linear loads, where the current or voltage has a sinusoidal or nonsinusoidal waveform. Data hold. Accommodates conductors up to 118 inches (30mm) in diameter. Resistance measurement. Digital clamp meter measures alternating current (ac) and direct current (dc) to 400 amp, ac voltage and dc voltage to 600 volts (v), resistance to 40 megaohms. Meets international electrotechnical commission (iec) safety standard 61010 and is certified for category iii installations up to 600v. Relative measurement. Max/min recording. Clamp with a 11″ (27 mm) jaw opening measures current without touching or interrupting the circuit.

 

Neoteck Digital Multimeter 6000 Counts PM18C AC DC Voltage Current Resistance Tester Non-Contact Voltage Test Temperature Multimeter Voltmeter Ammeter Ohmmeter with LCD Backlit #ad
Neoteck Digital Multimeter 6000 Counts PM18C AC DC Voltage Current Resistance Tester Non-Contact Voltage Test Temperature Multimeter Voltmeter Ammeter Ohmmeter with LCD Backlit
Neoteck Digital Multimeter 6000 Counts PM18C AC DC Voltage Current Resistance Tester Non-Contact Voltage Test Temperature Multimeter Voltmeter Ammeter Ohmmeter with LCD Backlit #ad - 【Lcd display with backlit】its large lcd display with backlit, which can display 6000 counts, and its bracket on the back supporting it to stand on the table, make the values convenient and clear to read in a low light. 【Functional diversity】auto power off, data hold, over-load protection, short-circuit protection, low battery indication, diode test, triode test are supported. 【Non-contact voltage test function】ncv test function with an indicator makes the danger visible, protecting you from harm and provides convenience to test. 【Digital multimeter with temperature test function】the multimeter coming with a k-type thermocouple for temperature measurement up to 250 degree celsius, which will measure the ambient temperature without the probe connected, is designed for measuring ac/dc voltage current resistance capacitance frequency duty ratio with true rms. 【various usages】as a general measurement tool with high accuracy, it is a reliable friend to help you troubleshoot a variety of automotive and household electrical problems, widely used in the school, laboratory, factory and other social field.

 

174100 Switch Cabinet Key Construction 153mm with Non-Contact Voltage Detector #ad
174100 Switch Cabinet Key “Construction” 153mm with Non-Contact Voltage Detector
174100 Switch Cabinet Key “Construction” 153mm with Non-Contact Voltage Detector #ad - Push button for on/off. Dc marking, ce marking. Visual indicator of operational readiness. 5 v button cells, commercially available, included in the standard delivery. Double rotation mechanism for three different closures. Cable breaks or cable detachments are also detected. Temperature range 0 °c, 40 °c. Detecting alternating currents also without current flow. Can be used universally in electrical engineering, gas and water supply, air conditioning and ventilation technology, industry and many more. Power supply 2 x 1. Voltage sensor for reliable detection of alternating current on cable connections, power sockets, fuses, circuits, connection sockets, lamps, light strings. Measuring range 50 v, 600 v, 50 hz – 60 hz.

 

Extech DV30 Non-Contact Adjustable AC Voltage Detector #ad
Extech DV30 Non-Contact Adjustable AC Voltage Detector
Extech DV30 Non-Contact Adjustable AC Voltage Detector #ad - Ac voltage detection from 12 volt to 600 vac cat iii-600 volt safety rating. Key features non-contact detection of ac voltage from 12vac to 600vac sensitivity adjustment increases or reduces sensor trigger threshold audible and visible voltage indication self test function small size with pocket clip specifications voltage sensitivity 12v to 600vac (50 to 500hz) operating temperature/humidity -10°c to 50°c (14 to 122°f) storage temperature -20 to 60oc (-4 to 140°f) relative humidity. Extech dv30 non-contact adjustable ac voltage detector, non-contact detection of ac voltage from 12vac to 600vac, audible and visible voltage indication, self test function the dv30 is an ncv detector with a sensitivity adjustment to pinpoint the voltage source. Complete with four lr44 button batteries and pocket clip.

 

Amprobe VP-1000SB Non-Contact Voltage Probe with Shaker CAT IV 1000 V #ad
Amprobe VP-1000SB Non-Contact Voltage Probe with Shaker, CAT IV 1000 V
Amprobe VP-1000SB Non-Contact Voltage Probe with Shaker, CAT IV 1000 V #ad - Alerts you with a bright led light, loud clear tone and vibration when when voltage from 90, 1000v ac is detected (compare to our vp-1000 model, with only a light alert). An essential tool when checking for voltage in your home simply hold the vp-1000sb next to the system to test, including extension cords, light sockets/outlets, gfci protected outlets, and light fixtures. 100% safety guaranteed dual insulated, cat iv 1000v safety rating, no exposed metal or conductive parts. Easy to use always on, no buttons, simply touch and test.

 

174300 Switch Cabinet Key Electrical 153mm with Non-Contact Voltage Detector #ad
174300 Switch Cabinet Key “Electrical” 153mm with Non-Contact Voltage Detector
174300 Switch Cabinet Key “Electrical” 153mm with Non-Contact Voltage Detector #ad - Double rotation mechanism for three different closures. Temperature range 0 °c, 40 °c. Measuring range 50 v, 600 v, 50 hz – 60 hz. Voltage sensor for reliable detection of alternating current on cable connections, power sockets, fuses, circuits, connection sockets, lamps, light strings. Push button for on/off. Cable breaks or cable detachments are also detected. Power supply 2 x 1. Detecting alternating currents also without current flow. Can be used universally in electrical engineering, gas and water supply, air conditioning and ventilation technology, industry and many more. Visual indicator of operational readiness. Dc marking, ce marking. 5 v button cells, commercially available, included in the standard delivery.

 

Extech DM220 CAT IV Mini Pocket MultiMeter with Non-Contact Voltage Detector #ad
Extech DM220 CAT IV Mini Pocket MultiMeter with Non-Contact Voltage Detector
Extech DM220 CAT IV Mini Pocket MultiMeter with Non-Contact Voltage Detector #ad - Range no temp, display lcd, bar graph no , min. ‘ Digital multimeter, pocket, basic features, 4000 instrument counts, basic dc accuracy +/-0. Ac amps 200ma, max. /Max. 100 uf to 200 uf, temp. Ac volts 600, max. Ohms 40 megohm, instrument frequency counter range 0. Dc amps 200ma, audible continuity yes, max. 80 percent of reading + 2 digits, cat iv 600v, cat iii 1000v, max. Memory no, data logging no, calibration certificate included no ‘. 001 hz to 10 khz, capacitance range 0. Dc volts 600, max.

 

HOLDPEAK 838L Manual-Ranging Digital Multimeter for Measuring AC DC Voltage DC Current Resistance Diodes Transistors Temperatures with Non Contact Voltage Test #ad
HOLDPEAK 838L Manual-Ranging Digital Multimeter for Measuring AC DC Voltage, DC Current, Resistance, Diodes, Transistors, Temperatures with Non Contact Voltage Test
HOLDPEAK 838L Manual-Ranging Digital Multimeter for Measuring AC DC Voltage, DC Current, Resistance, Diodes, Transistors, Temperatures with Non Contact Voltage Test #ad - ✔【Non contact voltage test (ncv) 】when the detection of voltage is greater than 90v(rms), keep close to the conductor, our instrument sensor will light and buzz. ✔【overload protection & continuity test】use the ptc protection circuit for resistance, temperature and frequency measurement if measured resistance less than 100ohm, the buzzer will sound. ✔【Low battery indication & backlit lcd】3 1/2 digit lcd display for visibility in dimly lit areas feature a low battery indicator so you never accidentally run out of juice. ✔【What u get】1x holdpeak 838l digital multimeter multi tester, 1x user’s manual, 1x test lead package doesn’t contain battery. ✔【Manual-ranging & auto-power off】1999 counts manual-ranging multimeter accurately measure ac/dc voltage, dc current, resistance, diode, hfe.

 

Tekpower TP18C General Purpose Manual-ranging True RMS ACDC 20A Digital Multimeter with Non-contact Voltage Detector NCV Live Wire Tester Flashlight #ad
Tekpower TP18C General Purpose Manual-ranging True RMS AC/DC 20A Digital Multimeter with Non-contact Voltage Detector (NCV), Live Wire Tester & Flashlight
Tekpower TP18C General Purpose Manual-ranging True RMS AC/DC 20A Digital Multimeter with Non-contact Voltage Detector (NCV), Live Wire Tester & Flashlight #ad - Designed in full conformance to iec61010-1 and cat iii 1000v, ce & rohs certified for product and personal safety. Other convenient features include data hold, auto power off, battery low indication, reverse polarity indication, and over-range indication. True rms measurement for ac voltage and amperage works with both sinusoidal and nonsinusoidal ac waveforms with spot-on accuaracy. General purpose digital multimeter tests ac/dc voltage, ac/dc amperage, resistance, capacitance, frequency, diode test, temperature, and continuity with built-in ncv, live wire tester and flashlight. Features a large, easy-to-read 25″ x 1″ back-lit lcd display with a maximum reading of 5999 and a protective holster with test leads holders.

 

Amprobe ACD-15 TRMS-PRO 2000A Digital Clamp Multimeter with VolTect Non-Contact Voltage Detection #ad
Amprobe ACD-15 TRMS-PRO 2000A Digital Clamp Multimeter with VolTect Non-Contact Voltage Detection
Amprobe ACD-15 TRMS-PRO 2000A Digital Clamp Multimeter with VolTect Non-Contact Voltage Detection #ad - True rms (root mean square) sensing meter provides accurate readings when measuring linear or non-linear loads, where the current or voltage has a sinusoidal or nonsinusoidal waveform. Meets international electrotechnical commission (iec) safety standard 61010 and is certified for category iii installations up to 600v. Transformer clamp with 177″ (45 mm) jaw opening measures current and frequency without touching or interrupting the circuit. Digital clamp meter measures alternating current (ac) to 2,000 amp, direct current (dc) voltage and ac voltage to 600 volts (v), capacitance to 2,000 microfarads, resistance to 6 megaohms, and frequency to 30 kilohertz (khz). Non-contact voltage detector senses ac voltage without making contact with the circuit.

 

Digital MultimeterHOLDPEAK 770HC Auto-Ranging Multi Tester with Non Contact Voltage Test Volt Amp Ohm Meter with Diode and Continuity Test #ad
Digital Multimeter,HOLDPEAK 770HC Auto-Ranging Multi Tester with Non Contact Voltage Test Volt Amp Ohm Meter with Diode and Continuity Test
Digital Multimeter,HOLDPEAK 770HC Auto-Ranging Multi Tester with Non Contact Voltage Test Volt Amp Ohm Meter with Diode and Continuity Test #ad - Low battery indication & blacklit lcd 3 1/2 digit lcd display for visibility in dimly lit areas feature a low battery indicator so you never accidentally run out of juice. Over load protection & continuity test use the ptc protection circuit for resistance, temperature and frequency measurement if measured resistance less than 100¦¸, the buzzer will sound. Auto-ranging & auto-power offdc & ac current ( 600a range with ac/dc current clamp adapter), resistance, capacitor, frequency, duty cycle, temperature, transistor hfe. Non contact voltage test(ncv) shipped from usa and fulfilled by amazon when the detection of voltage is greater than 90v(rms), keep close to the conductor, the instrument sensor will light and buzz. Package content 1x holdpeak 770hc digital multimeter, 2x 15v(aa) battery, 1x user’s manual, 1x test lead.

 

Mastech MS8211 Pen-Type Auto-Ranging Digital Multimeter with Non-contact AC Voltage Detector #ad
Mastech MS8211 Pen-Type Auto-Ranging Digital Multimeter with Non-contact AC Voltage Detector
Mastech MS8211 Pen-Type Auto-Ranging Digital Multimeter with Non-contact AC Voltage Detector #ad - 5v (aaa) x 2, carrying bag, manual, test lead. Technical specifications” dcv 200m/2/20/200/600v +/-0. 2%, continuity test, diode test, non-contact ac voltage detector, power 1. 110g (including batteries). Its unique non-contact ac voltage sensor is a great feature for electric inspection, the maximum detection distance can be as far as 6 inches depending on the adjustable sensitivity. 8%, resistance 200/2k/20k/200k/2m/20m +/-1. The mastech ms8211 is a pen-type digital multimeter with non-contact ac voltage sensor, it can measure ac/dc voltage, resistance, diode and continuity test. Features conforms to the iec1010-1 standard cat iii 600v over-molding rubber case protects meter, display 1,999 counts, auto/manual range, maximum value hold, data hold, auto power off retractable tip, sensitivity of ac voltage adjustable, sound and flash alarm. 5v (aaa) x 2, size 208 x 38 x 29mm, weight approx. 7%, acv 200m/2/20/200/600v +/-0. What’s in the box mastech ms8211 pen-type dmm, battery 1.

 

Tekpower TP19C General Purpose Manual-ranging True RMS ACDC 10A Digital Multimeter with Non-contact Voltage Detector NCV Live Wire Tester Flashlight #ad
Tekpower TP19C General Purpose Manual-ranging True RMS AC/DC 10A Digital Multimeter with Non-contact Voltage Detector (NCV), Live Wire Tester & Flashlight
Tekpower TP19C General Purpose Manual-ranging True RMS AC/DC 10A Digital Multimeter with Non-contact Voltage Detector (NCV), Live Wire Tester & Flashlight #ad - Designed in full conformance to iec61010-1 and cat iii 1000v, ce & rohs certified for product and personal safety. General purpose digital multimeter tests ac/dc voltage, ac/dc amperage, resistance, capacitance, frequency, diode test, temperature, and continuity with built-in ncv, live wire tester and flashlight. Features a large, easy-to-read 25″ x 1″ back-lit lcd display with a maximum reading of 5999 and a protective holster with test leads holders. Other convenient features include data hold, auto power off, battery low indication, reverse polarity indication, and over-range indication. True rms measurement for ac voltage and amperage works with both sinusoidal and nonsinusoidal ac waveforms with spot-on accuaracy.

 

General Tools CM660 Dual Display Amp Clamp with ACDC Amps True RMS Non-Contact Voltage Detector 750V 600A 001A Resolution #ad
General Tools CM660 Dual Display Amp Clamp with AC/DC Amps, True RMS, Non-Contact Voltage Detector, 750V, 600A, 0.01A Resolution
General Tools CM660 Dual Display Amp Clamp with AC/DC Amps, True RMS, Non-Contact Voltage Detector, 750V, 600A, 0.01A Resolution #ad - Two 6000-count readouts for simultaneous display of real-time current or voltage on primary readout and line frequency on secondary readout. Features 16 functions, 49 ranges and large backlit digital lcd. Built-in non-contact voltage (ncv) detector with 4 sensitivity settings and audible and visual alerts. Uses beeper to verify integrity of diodes and check circuits for continuity. Measures temperature from -58 to 1112 degrees f (-50 to 600 degrees c) using included k type stem thermocouple.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.