Best 20 Tigs

 

WeldingCity 5-Lb ER4043 Aluminum 4043 TIG Welding Rods 116 16mm x 36 914mm
WeldingCity 5-Lb ER4043 Aluminum 4043 TIG Welding Rods 1/16″ (1.6mm) x 36″ (914mm)
WeldingCity 5-Lb ER4043 Aluminum 4043 TIG Welding Rods 1/16″ (1.6mm) x 36″ (914mm) - Package of 2-lb, 5-lb and 10-lb er4043 tig welding rods available us based welding supplier strong technical support with experienced customer service to address buyer’s any question. Premium quality er4043 aluminum tig welding rods 36″ long with diameter 1/16″, 3/32″ and 1/8″. Available rod diameters 1/16″ (16mm), 3/32″ (24mm) and 1/8″ (32mm). Features and applications for tig gas-tungsten arc welding (gtaw) welding process er4043 is a general-purpose, all-position aluminum welding rod used to weld various grades of aluminum it contains silicon additives, which may improve fluidity of the weld pool and also produces a weld less sensitive to cracking its bright weld finish makes it a popular choice of welders. Specification aws a510/asme sfa a510/er4043 36″ (914mm) long rods with single end stamped typical chemical composition % si=45-60 fe=08 cu=03 mn=005 mg=005 zn=01 ti=02 al=balance.

 

ER308L - TIG Stainless Steel Rod - 36 x 0045 5 Lb
ER308L – TIG Stainless Steel Rod – 36″ x 0.045″ (5 Lb)
ER308L – TIG Stainless Steel Rod – 36″ x 0.045″ (5 Lb) - For welding 19% chromium, 9% nickel austenitic stainless steels such as 304l, 308 l as well as stabilized grades 321 and 347 the maximum carbon content of less than 003% preserves the intergranular corrosion resistant properties of the weld deposit and weld zone, yielding x-ray quality welds. Recommended tig welding parameters, dcen (dc-), recommended tungsten use 2% thoriated, 2% ceriated, 2% or 15% lanthanated or rare earth, shielding gas use 100% argon or argon/helium for greater penetration and higher speeds. Common applications include stainless steel fabrication of dairy, food or restaurant equipment, chemical tanks and general purpose applications where corrosion conditions are only a moderate concern suitable for cryogenic applications. Read this main image is for reference only please check picture #2 for an approximate quantity of rods per pound. Available diameters 0045″, 1/16″, 3/32″, 1/8″, 5/32″ and 3/16″ available packages 1 lb, 2 lb, 5 lb, 10 lb and 11lb select your choice from the size menu options.

 

Alffun 58 PCS TIG Welding Torch Kit 040~18 Gas Lens Setup WP-92025
Alffun 58 PCS TIG Welding Torch Kit 040″~1/8″ Gas Lens Setup WP-9/20/25
Alffun 58 PCS TIG Welding Torch Kit 040″~1/8″ Gas Lens Setup WP-9/20/25 - Set includes25 alumina ceramic cups, 20 collets, 8 gas lens collet bodies, 2 gasket , 3 torch head back caps. Fine workmanship precise made makes it combined very well to machine. 100% brand new and high quality durable and reliable to use. Provide a good welding performance, gives welders an comfortable feeling during the welding job. Tig torch accessory kit (58-pcs) for gas lens set-up in torch 9, 20 and 25 series.

 

ERCuSi-A Silicon Bronze TIG Welding Rod - 36 x 116- 1 Lb
ERCuSi-A Silicon Bronze TIG Welding Rod – 36″ x 1/16″- (1 Lb)
ERCuSi-A Silicon Bronze TIG Welding Rod – 36″ x 1/16″- (1 Lb) - Silicon bronze is a copper alloy rod containing 3% silicon and used for tig or oxyacetylene welding of copper, brass, bronze, steel and cast iron. Diameter 1/16″ (16mm), length 36″. Silicon bronze is best known for welding plain or galvanized steel sheet metal in the manufacturing of steel cabinets, metal furniture and ductwork. Available in 1 lb, 2 lb, 5 lb and 10 lb packages select your option from the menu, main image is for reference only please check picture #2 for an approximate quantity of rods per pound. Weld deposits demonstrate high strength, excellent corrosion resistance and good weldability, making this wire suitable for surfacing parts in corrosive environments, tensile strength 51,000 psi.

 

PYTHONrap TIGMIG Torch Cable Cover - Heavy Duty Nylon - for 25 feet Torches
PYTHONrap TIG/MIG Torch Cable Cover – Heavy Duty Nylon – for 25 feet Torches
PYTHONrap TIG/MIG Torch Cable Cover – Heavy Duty Nylon – for 25 feet Torches - This 22 feet long welding cable cover fits torches with 25 feet long cables. Width 4″, will cover most common tig torches cables series 9, 12, 17, 18, 20, 24, 25, 26 either 1 o 2 cable pieces, and mig torches with 25 feet cable. Heavy duty cable covers keep your torch cables protected from the harsh and dirty environment commonly seen in the welding industry a small investment will prevent the costly replacement of your equipment. Light weight full-length zipper. This cover is manufactured in heavy-duty woven nylon, a much better material than simple cloth.

 

EVERLAST PowerARC 140STi 140amp Lift Start TIG  Stick IGBT Welder Dual Voltage
EVERLAST PowerARC 140STi 140amp Lift Start TIG / Stick IGBT Welder Dual Voltage
EVERLAST PowerARC 140STi 140amp Lift Start TIG / Stick IGBT Welder Dual Voltage - One of the best features the powerarc 140st has to offer is the 120v/240v dual-voltage capability, which allows the unit to go and weld virtually anywhere there is a clean power source available. The welder features both auto adaptive hot start and auto adaptive arc force control in stick mode and improves welability in with hard to start welding electrodes and in situations where rod sticking can be a problem. Remember the regulator is optional, so be sure to buy one of our gas regulators if you plan to use it for tig. The arc quality is on the level of much larger, commercial class machines. This tiny igbt inverter welder features both stick and dc lift tig capability. If you are looking for maximum flexibility and performance in a small utility class welder package, look no further than the powerarc 140st from everlast. It comes with its own carry case and includes the stick torch with the cable and dinse style connector, gas valve tig torch with cable and dinse connector and the work clamp. The welding arc stability isn’t sacrificed with this small unit.

 

Alffun 68pcs TIG Torch Consumables Accessories KIT for TIG Welding Torch PTA DB SR WP 17 18 26 Back CapCollet BodyAlumina Nozzle
Alffun 68pcs TIG Torch Consumables Accessories KIT for TIG Welding Torch PTA DB SR WP 17 18 26 Back Cap/Collet Body/Alumina Nozzle
Alffun 68pcs TIG Torch Consumables Accessories KIT for TIG Welding Torch PTA DB SR WP 17 18 26 Back Cap/Collet Body/Alumina Nozzle - Fine workmanship precise made makes it combined very well to machine100% brand new and high quality durable and reliable to use. Provide a good welding performance, gives welders an comfortable feeling during the welding job. 10n series alumina nozzles 10n50 10n49 10n48 10n47 and 10n46, tig torch parts collet and collet body 1/16″-3/32″-1/8″, tig torch part long back cap and short back cap 57y02 57y04. This kit fits all 17 26 series air cooled welding torches and 18 series water cooled torches,including the lincoln pta-17, pta-18 and pta-26 torches, miller diamondback db17,db18 and db 26 torches, along with the weldcraft wp-17, wp-18 and wp-26 torches. Set includes8pcs back cup, 20 collets, 20pcs collet body, 20pcs alumina gas cup/ nozzle.

 

Jack&Dave 23pcsset New Pyrex TIG Welding Torch Gas Lens 10 Pyrex Cup Kit for Tig WP-171826 Torch Welding Accessories
Jack&Dave 23pcs/set New Pyrex TIG Welding Torch Gas Lens #10 Pyrex Cup Kit for Tig WP-17/18/26 Torch Welding Accessories
Jack&Dave 23pcs/set New Pyrex TIG Welding Torch Gas Lens #10 Pyrex Cup Kit for Tig WP-17/18/26 Torch Welding Accessories - 4mm 3/32″1x 10n25s stubby collet 3. 040″1x 17cb20g collets body stubby gas lens 1. 040″1x 10n23s stubby collet 1. 4x #10 glass cup 16mm1x 57y02 long back cup for wp-17/18/261x 57y03 medium back cup for wp-17/18/261x 57y04 short back cup for wp-17/18/261x 17cb20g collets body stubby gas lens 1. 6mm 1/16″1x 17cb20g collets body stubby gas lens 2. 0mm. 0mm. 6mm 1/16″1x 10n24s stubby collet 2. 2mm 1/8″1x 10n22s stubby collet 1. 4mm 3/32″1x 17cb20g collets body stubby gas lens 3. 2mm 1/8″6x temperature resistant o-rings2x gas lens insulator.

 

SSC Controls C810-1425 TIG Welding Foot Pedal Miller Welders 14-Pin Plug 25-ft Cable Replaces RFCS-14 043554 194744 Amperage Control Made in USA
SSC Controls C810-1425 TIG Welding Foot Pedal, Miller Welders, 14-Pin Plug, 25-ft Cable, Replaces RFCS-14, 043554, 194744, Amperage Control, Made in USA
SSC Controls C810-1425 TIG Welding Foot Pedal, Miller Welders, 14-Pin Plug, 25-ft Cable, Replaces RFCS-14, 043554, 194744, Amperage Control, Made in USA - Tig welding foot pedal with steel case and professional-grade quality. 14-pin plug and 25-ft cable for miller and hobart tig welders. Made in usa by ssc controls company. Replaces miller rfcs-14, 043554, rfcs-14 hd, 194744 weld foot control pedals. Press to activate gas contactor and increase amperage release to turn off and activate afterflow.

 

Caiman White Goatskin Long Cuff Welding-TigMig Medium
Caiman White Goatskin, Long Cuff, Welding-Tig/Mig Medium
Caiman White Goatskin, Long Cuff, Welding-Tig/Mig Medium - There is a 4 inch cuff that is long split leather. Caiman white goatskin, long cuff, welding-tag/mug medium features resilient and durable goat grain leather. These gloves are completely unlined. The size is medium.

 

TIG Welding Tungsten Electrode 2 Thoriated 332 x 7 Red EWTh-2 10-pk YESWELDER
TIG Welding Tungsten Electrode 2% Thoriated 3/32″ x 7″ (Red, EWTh-2) 10-pk YESWELDER
TIG Welding Tungsten Electrode 2% Thoriated 3/32″ x 7″ (Red, EWTh-2) 10-pk YESWELDER - ● The thorium electrode is a traditional outstanding welding electrode, whose arc is continuous, stable, without spreading and dispersing. ● American welding society standard aws a5. ● Color code red. 4x175mm) 10pk  you get one box of ten (10) 2. 12m/a5. 0% thoriated (red). As it is not easy to get a round top with thermostability, it performs well in lifetime. 0% thoriated (red) tungsten electrodes at this price. ● 10-pk premium quality tig welding tungsten electrodes 2. 122009 conformance ●size 3/32″x7″(2.

 

TIG Welding Tungsten Electrodes 2 Lanthanated 332 x 7 Blue WL20 10-Pack
TIG Welding Tungsten Electrodes 2% Lanthanated 3/32″ x 7″ (Blue, WL20) 10-Pack
TIG Welding Tungsten Electrodes 2% Lanthanated 3/32″ x 7″ (Blue, WL20) 10-Pack - Premium ten (10) pack of blue ewla-2 2% lanthanated tungsten rods for tig welding. Free materials safety data sheet (msds) and certificate of conformance provided below in the product information, adhering to american welding society standard a512m/a5122009. Electrode size 3/32″ x 7″ or 24mm x 175mm. United states based manufacturing & customer service staff are here to help you. Highest rated and most reviewed tungsten electrodes on amazon.

 

HITBOX TIG Welder 200A Portable TIG Welding Machine High Frequency 220V TIG MMA 200 with TIG Stick IGBT Inverter Welder
HITBOX TIG Welder 200A Portable TIG Welding Machine High Frequency 220V TIG MMA 200 with TIG Stick IGBT Inverter Welder
HITBOX TIG Welder 200A Portable TIG Welding Machine High Frequency 220V TIG MMA 200 with TIG Stick IGBT Inverter Welder - Inverter frequency up to 100khz, the technology is mature, stable performance. Tig welding thickness 03-50mm, and application of electrode diameter (mm) 2–32mm. Adopt newly igbt inverter technology, compared to mos technology, greatly reduce breakdown. Easy arc ignition, litter spattering, stable current and good shaping. 200 amp igbt tig stick welder with tig torch, earth clamp, electrode holder and gas tube.

 

TIG Stubby Gas Lens Collet Body Pyrex Cup Kit for DB SR WP 17 18 26 TIG Welding Torch 39pcs
TIG Stubby Gas Lens Collet Body Pyrex Cup Kit for DB SR WP 17 18 26 TIG Welding Torch 39pcs
TIG Stubby Gas Lens Collet Body Pyrex Cup Kit for DB SR WP 17 18 26 TIG Welding Torch 39pcs - 6mm 17gl116 stubby gas lens 1pcs 3/32″ Ø2. 2mm 17gl18 stubby gas lens 1pcs 0. 040″ Ø1. 2mm 10n25s collet 20 x temperature resistant o-rings 1pcs gas len insulator this studdy gas lens & collet kits fits all 17 & 26 series air cooled torches and 18 series water cooled torches, including the lincoln pta-17, pta-18 and pta-26 torches,miller diamondback db17,db18 and db 26 torches, along with the weldcraft wp-17, wp-18 and wp-26 torches. Packing listing 1 x Ø6mm  4#  pyrex glass cup 1 x Ø8mm  5#  pyrex glass cup 1 x Ø10mm  6#  pyrex glass cup 1 x Ø11mm  7#  pyrex glass cup 1 x Ø13mm  8#  pyrex glass cup 1 x Ø16mm  10#  pyrex glass cup 1 x Ø21mm  12#  pyrex glass cup 1 x 57y02 long back cup for wp-17/18/26 1 x 57y03 medium back cup for wp-17/18/26 1 x 57y04 short back cup for wp-17/18/26 1pcs 0. 6mm 10n23s collet 1pcs 3/32″ Ø2. 4mm 17gl332 stubby gas lens 1pcs 1/8″ Ø3. 040″ Ø1. 4mm 10n24s collet 1pcs 1/8″ Ø3. 0mm 10n22s collet 1pcs 1/16″ Ø1. 0mm 17gl040 stubby gas lens 1pcs 1/16″ Ø1.

 

RX WELD 23PCS TIG Stubby Gas Lens 17GL332 332 12 Pyrex Cup TIG Gas Lens Alumina Nozzle Kit Fit DB SR WP 17 18 26 TIG Welding Torch
RX WELD 23PCS TIG Stubby Gas Lens 17GL332 3/32″ & #12 Pyrex Cup & TIG Gas Lens Alumina Nozzle Kit Fit DB SR WP 17 18 26 TIG Welding Torch
RX WELD 23PCS TIG Stubby Gas Lens 17GL332 3/32″ & #12 Pyrex Cup & TIG Gas Lens Alumina Nozzle Kit Fit DB SR WP 17 18 26 TIG Welding Torch - With excellent plasticity, toughness and crack resistance, especially low temperature impact toughness higher uses for a variety of locations of the pipeline tig welding arc welding and arc welding, can be satisfied with the welding joints can be welded carbon steel and some low alloy steel. This kit fits all 17 & 26 series air cooled torches and 18 series water cooled torches, including the lincoln pta-17, pta-18 and pta-26 torches, miller diamondback db17,db18 and db 26 torches, along with the weld craft wp-17, wp-18 and wp-26 torches. 2pcs 3/32″ 10n24s tig collet and 2pcs 3/32″ 17gl332 stubby gas lens. 4pcs #12 pyrex glass cup 16mm and 10pcs temperature resistant o-rings. 2pcs cup gasket and 3pcs back cup for tig welding torch.

 

Revco REVCO - T50 - LargeThe Ultimate Tig Welding Glove Large
Revco REVCO – T50 – Large”The Ultimate Tig Welding Glove”, Large
Revco REVCO – T50 – Large”The Ultimate Tig Welding Glove”, Large - Flame resistant cotton. Drag patch reinforcement. Seamless index finger. Sidewall construction. Ergonomic keystone thumb.

 

TIG Welding Tungsten Electrodes 2 Thoriated 332 x 7 Red WT20 10-Pack
TIG Welding Tungsten Electrodes 2% Thoriated 3/32″ x 7″ (Red, WT20) 10-Pack
TIG Welding Tungsten Electrodes 2% Thoriated 3/32″ x 7″ (Red, WT20) 10-Pack - Electrode size 3/32″ x 7″ or 24mm x 175mm. Highest rated and most reviewed tungsten electrodes on amazon. Free materials safety data sheet (msds) and certificate of conformance provided below in the product information, adhering to american welding society standard a512m/a5122009. United states based manufacturing & customer service staff are here to help you. Premium ten (10) pack of red ewth-2 2% thoriated tungsten rods for tig welding.

 

ER70S-6 0045 - 116 - 332 - 18 X 36 Tig Welding Wire rod 10 lb 18
ER70S-6 0.045″ – 1/16″ – 3/32″ – 1/8″ X 36″ Tig Welding Wire rod 10 lb (1/8″)
ER70S-6 0.045″ – 1/16″ – 3/32″ – 1/8″ X 36″ Tig Welding Wire rod 10 lb (1/8″) - – brand new and unpacked., Er70s-6 1/16″ x 36″ tig welding wire (10lbs), we have other sizes and grades . 045″ 1/16″, 3/32″ & 1/8″ (er70s-6 & er70s-2), we offer large quantity discount and special freight policy.

 

Blue Demon 150 Amp air cooled TIG torch GTAW
Blue Demon 150 Amp air cooled TIG torch, GTAW
Blue Demon 150 Amp air cooled TIG torch, GTAW - Includes 3 nozzle and collet sizes for use with a variety of tungsten sizes. 35-70 style twist-lock connection allows for direct quick connection. For tig welding up to 150 amps. Air-cooled. V-style torch features a gas on/off valve mounted directly on the torch for quick and convenient control of shielding gas. 10-25 dinse style connector. 10′ lead, 12′ gas hose. Full-length fabric zipper closure protects the power cable and gas hose. Duty cycle is 35% at 150 amps.

 

Tig-Pen Welding Finger Feeder Rod Holder Pencil Filler Metal
Tig-Pen Welding Finger Feeder Rod Holder Pencil Filler Metal
Tig-Pen Welding Finger Feeder Rod Holder Pencil Filler Metal - Tig holder holds your filler rod and lets you advance the filler wire by thumb wheel. With the feeder comfortable in your hand, advance the wire by rolling the rubber wheel with the tip of your index finger. Tig finger feeder feeds tig filler rod comfortably. 8mm (. Insert the tig filler wire from the rear of the unit – not from the front. Suitable for tig wire diameters 0. 2mm (1/8”). Hold the feeder like a pen or pencil. 030”) to 3.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.