25 Most Wanted Standard Sockets

 

SK Hand Tool 43709 12 Point 14-Inch Drive Standard Socket 10mm Chrome
SK Hand Tool 43709 12 Point 1/4-Inch Drive Standard Socket, 10mm, Chrome
SK Hand Tool 43709 12 Point 1/4-Inch Drive Standard Socket, 10mm, Chrome - And avoid rounding of rusted or damaged fasteners. High polish superkrome plating results in a jewelry-like finish providing long life and maximum corrosion resistance. Suregrip drive design drives the side of the fastener, not the corner, to provide increased strength.

 

Grey Pneumatic 3046R 34 Drive x 1-716 Standard Socket
Grey Pneumatic (3046R) 3/4″ Drive x 1-7/16″ Standard Socket
Grey Pneumatic (3046R) 3/4″ Drive x 1-7/16″ Standard Socket - Engineered specifically for use with impact tools using the most up to date industrial specifications tested to the highest specifications to deliver outstanding performance at the competitive cost lifetime warranty.

 

Spare Tire Changing Repair Tool Kit Universal Telescopic Extendable Wrench with 4 Standard Socket  2 Ton Car Scissor Jack with Crank Handle
Spare Tire Changing Repair Tool Kit Universal Telescopic Extendable Wrench with 4 Standard Socket + 2 Ton Car Scissor Jack with Crank Handle
Spare Tire Changing Repair Tool Kit Universal Telescopic Extendable Wrench with 4 Standard Socket + 2 Ton Car Scissor Jack with Crank Handle - 5 wide applications this is the universal kit suitable for small and medium sized vehicles such as cars, toyota, nissan, kia, buick, santana, bmw, honda, motorcycle, and much more. 4 2 ton capacity scissor jack lift range 90-360mm. 1 4 standard extendable wheel brace, 17/19/21/23mm. 2 telescopic extending handle extends from 350mm to 550mm. 3 high-torque telescopic extending car wheel nut wrench easily undoes wheel nuts.

 

SK 4453 13 Piece 38-Inch Drive 12 Point Deep 14-Inch to 1-Inch Standard Socket Set
SK 4453 13 Piece 3/8-Inch Drive 12 Point Deep 1/4-Inch to 1-Inch Standard Socket Set
SK 4453 13 Piece 3/8-Inch Drive 12 Point Deep 1/4-Inch to 1-Inch Standard Socket Set - Made in the usa. Patented superkrome finish for durability and maximum corrosion resistance. Suregrip hex design helps avoid edge breakage. Made in the usa. Deep fractional socket set with high-polish superkrome finish.

 

Grey Pneumatic 3052R 34 Drive x 1-58 Standard Socket
Grey Pneumatic (3052R) 3/4″ Drive x 1-5/8″ Standard Socket
Grey Pneumatic (3052R) 3/4″ Drive x 1-5/8″ Standard Socket - Leverage is improved, eliminating rounding and increasing strength. Tool-to-fastener contact area is ten times greater than with a conventional design. Improved torque load capabilities of every fastener. 3/4 dr x 1-5/8 stnd (gry-3052r). Wright drive takes full advantage of advanced cad/cam technology.

 

SK Hand Tool 40904 6 Point 14-Inch Drive Standard Socket 18-Inch Chrome
SK Hand Tool 40904 6 Point 1/4-Inch Drive Standard Socket, 1/8-Inch, Chrome
SK Hand Tool 40904 6 Point 1/4-Inch Drive Standard Socket, 1/8-Inch, Chrome - High polish superkrome plating results in a jewelry-like finish providing long life and maximum corrosion resistance. Sockets are manufactured to rigid specification in a variety of sizes and styles to ensure you always have the right tool for each application. Design drives the side of the fastener, not the corner, to provide increased strength and avoid rounding of rusted or damaged fasteners.

 

SK Hand Tool 45108 6 Point 38-Inch Drive Standard Socket 14-Inch Chrome
SK Hand Tool 45108 6 Point 3/8-Inch Drive Standard Socket, 1/4-Inch, Chrome
SK Hand Tool 45108 6 Point 3/8-Inch Drive Standard Socket, 1/4-Inch, Chrome - Suregrip drive design drives the side of the fastener, not the corner, to provide increased strength. And avoid rounding of rusted or damaged fasteners. High polish superkrome plating results in a jewelry-like finish providing long life and maximum corrosion resistance.

 

SK Hand Tool 43910 12 Point 14-Inch Drive Standard Socket 516-Inch Chrome
SK Hand Tool 43910 12 Point 1/4-Inch Drive Standard Socket, 5/16-Inch, Chrome
SK Hand Tool 43910 12 Point 1/4-Inch Drive Standard Socket, 5/16-Inch, Chrome - High polish superkrome plating results in a jewelry-like finish providing long life and maximum corrosion resistance. And avoid rounding of rusted or damaged fasteners. Suregrip drive design drives the side of the fastener, not the corner, to provide increased strength.

 

Powerbuilt 940528 38 Dr 6 Pt SAE Standard Socket 916
Powerbuilt 940528 3/8″ Dr. 6 Pt. SAE Standard Socket, 9/16″
Powerbuilt 940528 3/8″ Dr. 6 Pt. SAE Standard Socket, 9/16″ - Founded in 1979, the long beach, california based firm is privately held, with global manufacturing and sales facilities serving customers on every continent. Powerbuilt by alltrade tools llc is a global leader in the design, manufacturing and marketing of tools and shop equipment. Alltrade offers our customers innovation, flexibility and speed to market. The company’s mission statement alltrade designs, markets and supplies tools and shop equipment that meet and exceed our customers’ expectations of quality, service and value, while achieving profits to ensure the company’s and its employees’ future growth and development.

 

Powerbuilt 940031 38 Dr 6 Pt Metric Standard Socket 16mm
Powerbuilt 940031 3/8″ Dr. 6 Pt. Metric Standard Socket, 16mm
Powerbuilt 940031 3/8″ Dr. 6 Pt. Metric Standard Socket, 16mm - Founded in 1979, the long beach, california based firm is privately held, with global manufacturing and sales facilities serving customers on every continent. The company’s mission statement alltrade designs, markets and supplies tools and shop equipment that meet and exceed our customers’ expectations of quality, service and value, while achieving profits to ensure the company’s and its employees’ future growth and development. Alltrade offers our customers innovation, flexibility and speed to market. Powerbuilt by alltrade tools llc is a global leader in the design, manufacturing and marketing of tools and shop equipment.

 

Armstrong 12-128 12-Inch Drive 12 Point Standard Socket 78-Inch
Armstrong 12-128 1/2-Inch Drive 12 Point Standard Socket, 7/8-Inch
Armstrong 12-128 1/2-Inch Drive 12 Point Standard Socket, 7/8-Inch - Unique socket retention method, cold form ball recess, provides consistent secure retention of the socket to the drive tool eliminating the possibility of either a loose fit or tight fit. Made in the usa, quality and availability. Eye-d markings optimize size visibility, also providing sae / metric differentiation. Socket wall dimensions are optimized to provide strength while retaining access to restricted fasteners. Radius corner design engages the flats of the fastener, not the corners, providing up to 15-percent -20-percent more torque while reducing fastener rounding, enhancing the turning of worn fasteners.

 

ABN Large SAE Standard Socket Holder Tray Rack Rails – 14 38” 12 Inch Drive 80-Piece Clips for Tool Organization
ABN Large SAE Standard Socket Holder Tray Rack Rails – 1/4″, 3/8”, 1/2″ Inch Drive 80-Piece Clips for Tool Organization
ABN Large SAE Standard Socket Holder Tray Rack Rails – 1/4″, 3/8”, 1/2″ Inch Drive 80-Piece Clips for Tool Organization - Mount anywhere organize your toolbox, mount on a wall vertically, set on your workbench, or store in a drawer sae standard 1/4″, 3/8″, 1/2″ inch socket drives. Contents package includes (1) abn small 80-piece socket trail tray. Built to last rail constructed from powder coated metal base for strength and longevity clips and rails constructed from nickel plated steel holds up to 80 sockets (30 sockets with 1/2-inch drives, 15 rails, 30 sockets with 3/8-inch drives, 15 rails, 20 sockets with 1/4-inch drives). Ultimate organization use the abn large sae standard socket holder tray rack rails, 1/4″, 3/8″, 1/2″ inch drive 80-piece clips to better organize your tools and parts 16-1/5″ x 6-1/10″ inch (412cm x 155cm) base size to take anywhere. Secure hold specially designed and shaped clips offer a firm and secure hold on sockets with exact tension for safe mounting and easy removing.

 

Grey Pneumatic 907MG 14 Drive x 7mm Magnetic Standard Socket
Grey Pneumatic (907MG) 1/4″ Drive x 7mm Magnetic Standard Socket
Grey Pneumatic (907MG) 1/4″ Drive x 7mm Magnetic Standard Socket - Chamfered open end for easier engagement of fasteners. Direct torque technology helps prevent rounding of fasteners. Hard stamped markings to prevent loss of identification over time. Knurled control ring for added grip when handling the socket. Full polish chrome vanadium finish helps prevent chipping and flaking under toughest environments.

 

SK Hand Tool 48217 6 Point 12-Inch Drive Standard Socket 17mm Chrome
SK Hand Tool 48217 6 Point 1/2-Inch Drive Standard Socket, 17mm, Chrome
SK Hand Tool 48217 6 Point 1/2-Inch Drive Standard Socket, 17mm, Chrome - High polish superkrome plating results in a jewelry-like finish providing long life and maximum corrosion resistance. Suregrip drive design drives the side of the fastener, not the corner, to provide increased strength. And avoid rounding of rusted or damaged fasteners.

 

Powerbuilt 648274 14 Dr 6 Pt SAE Standard Socket 932
Powerbuilt 648274 1/4″ Dr. 6 Pt. SAE Standard Socket, 9/32″
Powerbuilt 648274 1/4″ Dr. 6 Pt. SAE Standard Socket, 9/32″ - Powerbuilt by alltrade tools llc is a global leader in the design, manufacturing and marketing of tools and shop equipment. Founded in 1979, the long beach, california based firm is privately held, with global manufacturing and sales facilities serving customers on every continent. Alltrade offers our customers innovation, flexibility and speed to market. The company’s mission statement alltrade designs, markets and supplies tools and shop equipment that meet and exceed our customers’ expectations of quality, service and value, while achieving profits to ensure the company’s and its employees’ future growth and development.

 

Extendable Lug Wrench Universal with 17192123mm Standard Sockets  Scissor Car Jack Lift 2 Ton 42-15 inch Capacity - Spare Tire Kit Garage Tools Car Van Truck Emergency US Ship
Extendable Lug Wrench Universal with 17/19/21/23mm Standard Sockets + Scissor Car Jack Lift 2 Ton 4.2-15 inch Capacity – Spare Tire Kit Garage Tools Car Van Truck Emergency US Ship
Extendable Lug Wrench Universal with 17/19/21/23mm Standard Sockets + Scissor Car Jack Lift 2 Ton 4.2-15 inch Capacity – Spare Tire Kit Garage Tools Car Van Truck Emergency US Ship - 4 standard extendable wheel brace, 17/19/21/23mm. Wide applications this is the universal kit suitable for small and medium sized vehicles such as cars, toyota, nissan, kia, buick, santana, ford, bmw, honda, motorcycle, and other cars trucks vans small suvs. Telescopic extending handle extends from 350mm to 550mm. 2 ton capacity scissor jack lift range approx 105-385mm. High-torque telescopic extending car wheel nut wrench easily undoes wheel nuts.

 

Grey Pneumatic 2030M 12 Drive x 30mm Standard Socket
Grey Pneumatic (2030M) 1/2″ Drive x 30mm Standard Socket
Grey Pneumatic (2030M) 1/2″ Drive x 30mm Standard Socket - High polish superkrome plating results in a jewelry-like finish providing long life and maximum corrosion resistance. 1/2 dr x 30mm stnd (gry-2030m). Suregrip drive design drives the side of the fastener, not the corner, to provide increased strength.

 

GearWrench 80553 13 Piece 38-Inch Drive 6 Point Standard SAE Socket Set
GearWrench 80553 13 Piece 3/8-Inch Drive 6 Point Standard SAE Socket Set
GearWrench 80553 13 Piece 3/8-Inch Drive 6 Point Standard SAE Socket Set - Includes 1/4 to 1 standard sockets entry angle guides fastener serration depth as deep as the fastener large hard stamped identification kdt sockets use a double line (sae) & knurled line (mm) to easily identify standard vs. Metric sockets packaged in patented slide rail for easier positioning of sockets.

 

Williams 32146 12-Inch Drive 6 Point Standard Socket 1-716-Inch
Williams 32146 1/2-Inch Drive 6 Point Standard Socket, 1-7/16-Inch
Williams 32146 1/2-Inch Drive 6 Point Standard Socket, 1-7/16-Inch - Designed for quick engagement on both 6 and 12 point fasteners. Rugged chrome vanadium construction. Williams ratcheting combination wrenches feature a ratchet lever that is easily accessible.

 

Standard Plumbing Supply 120443 APEX TOOL GROUP-ASIA Master Mechanic 6 Point 12 Drive Deep Standard Socket 1-116
Standard Plumbing Supply 120443 APEX TOOL GROUP-ASIA Master Mechanic 6 Point 1/2″ Drive Deep Standard Socket, 1-1/16″
Standard Plumbing Supply 120443 APEX TOOL GROUP-ASIA Master Mechanic 6 Point 1/2″ Drive Deep Standard Socket, 1-1/16″ - This product is highly durable. This product is made in china. Master mechanic, 6 point, 1/2″ drive, 1-1/16″ deep standard socket.

 

Kobalt 19pc SAE Standard Socket Set in Hard Case Short Deep Mechanic Auto Tool
Kobalt 19pc SAE Standard Socket Set in Hard Case, Short & Deep Mechanic Auto Tool
Kobalt 19pc SAE Standard Socket Set in Hard Case, Short & Deep Mechanic Auto Tool - Unique socket retention method, cold form ball recess, provides consistent secure retention of the socket to the drive tool eliminating the possibility of either a loose fit or tight fit. Eye-d markings optimize size visibility, also providing sae / metric differentiation. Socket wall dimensions are optimized to provide strength while retaining access to restricted fasteners. Made in the usa, quality and availability. Radius corner design engages the flats of the fastener, not the corners, providing up to 15-percent -20-percent more torque while reducing fastener rounding, enhancing the turning of worn fasteners.

 

Stanley 95-444 10-Piece 12-Inch Drive Standard Socket Set SAE
Stanley 95-444 10-Piece 1/2-Inch Drive Standard Socket Set, SAE
Stanley 95-444 10-Piece 1/2-Inch Drive Standard Socket Set, SAE - Helps reduce fastener wear without contact with the outer 5% of the fastener. Max-drive design, a unique radius corner design that provides 15% more torque. 6 point standard 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16 inches. Limited lifetime warranty.

 

SK Hand Tool 45110 6 Point 38-Inch Drive Standard Socket 516-Inch Chrome
SK Hand Tool 45110 6 Point 3/8-Inch Drive Standard Socket, 5/16-Inch, Chrome
SK Hand Tool 45110 6 Point 3/8-Inch Drive Standard Socket, 5/16-Inch, Chrome - And avoid rounding of rusted or damaged fasteners. High polish superkrome plating results in a jewelry-like finish providing long life and maximum corrosion resistance. Suregrip drive design drives the side of the fastener, not the corner, to provide increased strength.

 

Wright Tool 4332 1 - 12 Drive Special 8-Point Square Standard Sockets
Wright Tool 4332 1″ – 1/2″ Drive Special 8-Point Square Standard Sockets
Wright Tool 4332 1″ – 1/2″ Drive Special 8-Point Square Standard Sockets - Tool-to-fastener contact area is ten times greater than with a conventional design. Improved torque load capabilities of every fastener. Stress is distributed over a much larger area. Leverage is improved, eliminating rounding and increasing strength. Wright drive takes full advantage of advanced cad/cam technology.

 

SK Hand Tool Hand Tool HAC 45118 6 Point 38-Inch Drive Standard Socket 916-Inch Chrome
SK Hand Tool Hand Tool HAC) 45118 6 Point 3/8-Inch Drive Standard Socket, 9/16-Inch, Chrome
SK Hand Tool Hand Tool HAC) 45118 6 Point 3/8-Inch Drive Standard Socket, 9/16-Inch, Chrome - High polish superkrome plating results in a jewelry-like finish providing long life and maximum corrosion resistance. And avoid rounding of rusted or damaged fasteners. Suregrip drive design drives the side of the fastener, not the corner, to provide increased strength.