1in. Drive 6 Point Standard Impact Socket – 3in. Tools Equipment Hand Tools - Orders can take approx. The estimated shipping cost will include this fee. This product also meets the large package requirement per ups/fedex. This product meets the oversized requirement per ups/fedex. 22-0966 point 1″” drive impact socket 3″” opening this is a special order item. 2-4 weeks to be shipped. The shipping weight reflected is the dimensional weight.
Wright Tool 3267 3/8 Drive Phillips Screwdriver Bit and Socket, #3 by Wright Tool - Number 3 phillips screwdriver bit socket3/8-inch driveconstructed of alloy steel for strength and durabilityoverall length of 1 13/16-inches and a bit length of 1-inchtwo piece phillips screwdriver bit socket and bit is replaceable3/8 inch driveoverall length of 1 13/16 inches and a bit length of 1 inch.
Performance Tool W38893 Hex Bit Socket, 3/8″ Drive, 3mm - Large stamping for quick identification. Polished nickel chrome plated finish resists corrosion. Chrome vanadium alloy steel construction for strength and durability all backed by a lifetime warranty. 3/8″ drive hex bit socket, 3mm. Recessed edges.
TEKTON 3/8-Inch Drive Deep Impact Socket Set, Metric, Cr-V, 12-Point, 7 mm – 19 mm, 13-Sockets | 47926 - High-contrast permanent laser etched size markings are easy-to-read, even in low light. Extra-deep broach accommodates longer fasteners. High-torque, 12-point socket design grips the flat sides of fasteners, not just the corners, preventing round-off. Meets or exceeds ansi performance standards. Made from forged and heat treated chrome vanadium steel with a corrosion-resistant black phosphate finish.
Impact Grade Socket Adapter/Extension Set Turns Power Drill Into High Speed Nut Driver,1/4-Inch Hex Shank to Drive for Adapters to Use with Drill Chucks, Sizes 1/4″ 3/8″ 1/2″, Cr-V, 3-Piece - ✓Aluminum alloy material suitable for heavy duty impact drivers. ✓Multifunction used in the installation of pneumatic screwdriver, electric screwdriver, pneumatic drill, manual screwdriver and other installation for the hexagonal tool it is a good accessory for conversion. ✓General usage this 3 piece hex shank bit driver extension bar set is designed to meet a variety of needs fits snugly and securely in your drill chuck or hand held driver consisting of your most common bit sizes 1/4″, 3/8″, and 1/3″ changing shank sizes provides versatility and convenience no matter which tool you chose to use great for the diy, household maintenance, and most general repairs, not for industrial work a great tool addition to any tool box set. ✓Purpose this adapter set is designed to provide a securely locked in extension to your existing tool provides additional length to reach into a multitude of hard to reach spaces the spring ball lock ensures a tight fit into the driver head to prevent slipping during use specifically machined to fit securely into a hand held driver, drill driver or impact wrench. ✓easy to choose different colour coded rings, make it easy to pick the right one.
1/4-inch Shank 65mm Long 7mm Hex Spanner Nut Driver Socket 3 Pcs - Designed and engined for long life and good durability for operating. The bell-shape and hex insert allow the bit to hold the bit securely in place for quicker installations. Used in manufacturing assembly systems and others.
GearWrench 80558 13 Piece 3/8-Inch Drive Metric Socket Set - Drake off road tools features a longer full polish ratchet with low profile head for greater comfort and access 60 tooth gear system for improved productivity and strength knurled line at base of socket allows drake off road tools for extra grip and easy identification of metric sizes turn down at base of sockets provide grip surface for easy disengagement shallow broach allows fasteners to be held in place set includes 3/8, drive 8mm, 9mm, 10mm, 11mm, 12mm, 13mm, 14mm, 15mm, 16mm and 17mm 6 point standard metric sockets, 3, and 6, 3/8, drive extensions and 3/8, drive full polish teardrop ratchet. Packaged in a blow molded case with removable lid.
T&E Tools 7-Piece 3/8-inch Drive Metric In-Hex Sockets 3 to 10mm 6-inch Length - Industrial grade quality made in taiwan to specifications and quality requirements of t&e tools. Longer 6-inch length for easier access on hard-to-reach fasteners. Hardened and tempered chrome vanadium steel alloy for superior strength and durability. 7-piece 3/8-inch drive socket set includes 3, 4, 5, 6, 7, 8 and 10mm hex. Custom-fit hard case to keep bits organized and easy to find.
Leviton Brite Gilt Shell W/Uno Thread, Pull Chain Socket For 3-Way Bulbs - High polish superkrome plating results in a jewelry-like finish providing long life and maximum corrosion resistance. Suregrip drive design drives the side of the fastener, not the corner, to provide increased strength. And avoid rounding of rusted or damaged fasteners.
Stanley Proto J4770-3M 1/4-Inch Drive Hex Bit Socket, 3mm - Stanley j4770-3m proto 1/4-inch drive hex bit socket, 3 mm two piece design allows replacement of worn bits 1/4-inch drive metric hex bit socket 3mm size 1-inch bit length 1-7/8-inch overall length.
DEWALT 3/8″ Hex Bit Socket 3 - The hex bit socket has directtorque technology to help prevent rounding of fasteners and to provide better grip.
Bahco Impact Socket 3 / 4 Inch 8-Sided 100 Mm For Trucks - Square 3 / 4. D 004 inch (1 mm) 123. Dimensions 000 ( mm) 84 inch. 100 mm. D 008 inch (2 mm) 60.
Wright Tool 3267 3/8″ Drive Phillips Screwdriver Bit and Socket, #3 - Overall length of 1 13/16 inches and a bit length of 1 inch. 3/8 inch drive. 3/8-inch drive. Constructed of alloy steel for strength and durability. Two piece phillips screwdriver bit socket and bit is replaceable. Overall length of 1 13/16-inches and a bit length of 1-inch. Number 3 phillips screwdriver bit socket.
SK Hand Tool 41838 6 Point 1/2-Inch Drive Deep Socket, 1-3-16-Inch, Chrome by SK Hand Tool - Suregrip drive design drives the side of the fastener, not the corner, to provide increased strengthand avoid rounding of rusted or damaged fastenershigh polish superkrome plating results in a jewelry-like finish providing long life and maximum corrosion resistance.
Orion Motor Tech 6.0 Powerstroke IPR Socket for 03-10 Ford Diesel - Used to remove and replace the injector pressure regulator (ipr) on ford 60l and other diesel engines. The injector pressure regulator is located in a very tight location. This tool is built to bottom out on the hex so it does not put torque on the connector in case it can be reused. Use with 3/8″ square drive | easy to operate & universal tool.
GearWrench 81080 1/4″ Drive Universal Hex Bit Metric Socket 3mm, Black - 1/4″ drive universal hex bit metric socket 3mm. Universal joint allows access to hard-to-reach fasteners.
1″” Drive 12 Point Standard Socket – 3″” Tools Equipment Hand Tools - Orders can take approx. This product also meets the large package requirement per ups/fedex. The shipping weight reflected is the dimensional weight. This product meets the oversized requirement per ups/fedex. 2-4 weeks to be shipped. The estimated shipping cost will include this fee. Features and benefits radius corner design engages the flats of the fastener, not the corners, providing 15-20% more torque prevents rounding of fasteners and enhances the turning of worn, rounded fasteners, extending fastener life and reducing chance of slippage manufactured to industrial specifications assuring a thin wall design with precise nut end dimensions specifically heat treated for the correct balance of strength and durability this is a special order item.
CTA Tools 1650 Trans Pump Socket (3 Point. Nissan) - 5″ california prop 65, warning, this product contains chemicals known to the state of california to cause cancer, birth defects or other reproductive harm. 1/2″ drive. Oal 1. 3 point socket for nissan transmission pump. Size 8ts.
Generic t Socket 3/ Drive Mechanics pact Socke Socket 3/4″ inch 27pc Impact 27pc Impact ive Mechanic Set 6 Points Tool ts Tool Metric & Standard 6 Points Tool - Product description heat treated drop forged 6 points socket flank-drive standard, cr-v black phosphate 12 socket sae 7/8, 15/16, 1, 1-1/8, 1-3/16, 1-5/16, 1-3/8, 1-7/16, 1-5/8, 1-3/4, 1-7/8, 2″ 10 sockets metric 22, 24, 27, 30, 32, 36, 38, 41, 46, 50mm 1pc ratchet handle 20″ long 1pc sliding (t) bar 18″ long extension bar 4″ & 8″ case included.
3/8in. Drive Phillips Screwdriver Bit Socket #3 - Screwdriver bit sockets description #3 phillips bit socket hex shank 1/4″ length 1. A. With the help of an extension or universal joint, they can reach into awkward spaces. S. With use of a ratchet, t-handle or spinner handle, they offer high-torque capabilities. 45483bit holder socket & bits, 3/8″ drive features and benefits made in the u. , Featuring quality workmanship and value. 69. Bits are available for all common fastener patterns.
GearWrench 81178 1/4″ Drive Phillips Bit Driver Socket #3, Black - 1/4″ drive phillips bit driver socket #3. Short overall length provides better access in tight spaces.
OEMTOOLS 27204 Oil Cap Filter Socket, 3-Piece - The oem 3 piece oil filter cap socket provides three popular oil filter wrenches for the gm, bmw, audi, and vw. These high quality 3/8 in drive forged sockets are designed to last a lifetime.
Drawer Slide Sockets 3 Sets 662SC - Socket measures 7/8″ x 3/8″ x 3″ deep. Designed for self closing drawer slides. Install with screws or staples.
9/16-inch 6″ Magnetic Swivel Spark Plug Socket | ARES 70231 | Ford Spark Plug Removal Tool - Innovative design, 360 degree swivel action for maximum flexibility. Save time, effort- interior magnet retains and protects the spark plug for easier installation doesn’t wear out over time like traditional rubber gaskets knurled grip on shaft and socket provides non-slip surface. Heavy-duty professional construction, constructed of durable, heat treated, chrome vanadium steel the chrome plating allows for easy cleanup and pro look. Design considerations, unique design works on 2004 and newer ford f-150 pickup trucks with 54l 3-valve triton v-8 engines. Reliable, effective & efficient tools, users trust ares to be quality tools you are backed by our performance assurance if you have any issues with your ares spark plug socket, simply contact customer service for troubleshooting help, parts, replacement, or refund.
GearWrench 89003 1/4″ Drive Pass Thru Phillips Bit Socket #3, Black - 1/4″ drive pass thru phillips bit socket #3. Vortex bit sockets are broached for use with 1/4″ and 3/8″ conventional square drive ratchets.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.