25 Best Welding Wires

 

WeldingCity ER308L Stainless Steel MIG Welding Wire 2-Lb Spool 0035 09mm #ad
WeldingCity ER308L Stainless Steel MIG Welding Wire 2-Lb Spool 0.035″ (0.9mm)
WeldingCity ER308L Stainless Steel MIG Welding Wire 2-Lb Spool 0.035″ (0.9mm) #ad - Features and applications for mig (gmaw) welding process for 304, 304l, 308, 308l, 321 and 347 stainless steels with a carbon content held to a max of 03% to to reduce the possibility of intergranular carbide precipitation most popular stainless wire for general-purpose applications where corrosion is moderate and applications at cryogenic temperatures shielding gas required, usually argon/co2 mix. Package of one (1-pk), two (2-pk) and five (5-pk) er308l mig welding wire 2-lb spools available us based welding supplier strong technical support with experienced customer service to address buyer’s any question. Premium quality er308l stainless steel mig welding wire 2-lb spool. Available wire diameters 0023″ (06mm), 0030″ (08mm), 0035″ (09mm), 0045″ (12mm). Specification aws a59/asme sfa a59/er308l 2-lb net weight of stainless steel welding wire 4″ spool wrapped in moisture-resistant plastic film typical deposited chemical composition % c=002, si=032, mn=170, p=001, s=0009, cr=200, ni=10, remain=fe.

 

WeldingCity E71T-11 Flux Core Gasless Mild Steel MIG Welding Wire 0035 09mm 10-lb Spool #ad
WeldingCity E71T-11 Flux Core Gasless Mild Steel MIG Welding Wire 0.035″ (0.9mm) 10-lb Spool
WeldingCity E71T-11 Flux Core Gasless Mild Steel MIG Welding Wire 0.035″ (0.9mm) 10-lb Spool #ad - Features self-shielded no welding protection gases needed multi-pass fillet and lap welding wrapped in vacuumed aluminum foil. Package of one (1) gasless welding wire spool us based welding supplier strong technical support with experienced customer service to address buyer’s any question. Specifications aws a520/asme sf a520/e71t-11 10-lb weight of welding wire 8-in spool, 2-in center hole. Premium quality flux-cored gasless e71t-11 mild steel mig welding wire 10-lb roll. Available wire diameters 0030″, 0035″ and 0045″.

 

ER70S-6 - MIG Mild Low Alloy Steel Welding Wire - 33 Lb x 0035 #ad
ER70S-6 – MIG Mild & Low Alloy Steel Welding Wire – 33 Lb x 0.035″
ER70S-6 – MIG Mild & Low Alloy Steel Welding Wire – 33 Lb x 0.035″ #ad - Common uses include construction work, farm implement fabrications, general shop applications with poor fit-up or rusty, oily plates, tanks, steel castings or forgings. Copper-plated and layer wound especially well suited for sheet metal applications or structural plate steels that have moderate amounts of rust oil or mill scale on them. Er70s-6 has the highest combination of manganese and silicon deoxidizers, permitting higher welding currents with 100% co2 shielding gas and leaving a smoother weld bead with little to zero post-weld cleanup. Available diameters 0023″, 0030″, 0035″and 0045″, available spool weights 33 and 44 lb select from menu. Er70s-6 is the most common of the copper-coated mild steel gmaw (mig) wires for single or multiple pass welding.

 

Harris E70S6H8 ER70S-6 MS Spool with Welding Wire 0045 lb x 33 lb #ad
Harris E70S6H8 ER70S-6 MS Spool with Welding Wire, 0.045 lb. x 33 lb.
Harris E70S6H8 ER70S-6 MS Spool with Welding Wire, 0.045 lb. x 33 lb. #ad - Conforms to aws a518 er70s-6. Contains additional deoxidizers providing a better wetting, giving a flatter bead shape. Usually used with 75/25 (argon/c02) shielding gas or with higher contents of argon. Can also be used with 100% c02.

 

PGN - ER70S-6 035 09 mm Mild Steel MIG Welding Wire - 44 Lbs Spool #ad
PGN – ER70S-6 .035″ (0.9 mm) Mild Steel MIG Welding Wire – 44 Lbs Spool
PGN – ER70S-6 .035″ (0.9 mm) Mild Steel MIG Welding Wire – 44 Lbs Spool #ad - 012 / v 0. 5″ inch, spool diameter 2″ inch, center hole (hub) diameter 4″ inch, wide spool it can be used in tee welding of carbon steel and low alloy steel in the corresponding strenght grade. 035″ inches (0. The roll comes packed in moisture-resistant plastic film. 08 / mn 1. 02 / ni 0. 9mm) weight 44-lbs measurements 10. 03 mo 0. 89 / cr 0. 003 / cu 0. Deposited chemical composition (wt%) c 0. 50 / si 0. 11. 002 / p 0. Er70s-6 mild steel mig welding wire wire diameter. 013 / s 0.

 

Lincoln Electric ED023334 MIG Welding Wire L-56030 Spool #ad
Lincoln Electric, ED023334, MIG Welding Wire, L-56.030, Spool
Lincoln Electric, ED023334, MIG Welding Wire, L-56.030, Spool #ad - 030, container 12. 5 lb. Spool, min. Tensile strength (psi) 70, all medium to heavy mill scale base material, sheet metal to 380, 485 mpa (55, 70 ksi) yield strength material, automotive repair, robotic or hard automation and structural steel. Mig welding wire, super arc l-56, mild steel, copper coated, dia. ). (In.

 

Lincoln Electric ED030584 MIG Welding Wire NR-211-MP035 Spool #ad
Lincoln Electric, ED030584, MIG Welding Wire, NR-211-MP.035, Spool
Lincoln Electric, ED030584, MIG Welding Wire, NR-211-MP.035, Spool #ad - 035, container 1. 7 mm (1/2 in. ), Applications with copper back-up, sheet or thin gauge metal, propane cylinders and robotics/hard automation. Tensile strength (psi) 70, plate thicknesses in the range of 7. 9 mm (5/16 in. (In. Spool, min. Mig welding wire, innershield nr-211-mp , mild steel flux-core, dia. 0 lb. ) to 12. ).

 

WeldingCity E71T-GS Flux-Core Gasless Mild Steel MIG Welding Wire 0030 10-lb Spool #ad
WeldingCity E71T-GS Flux-Core Gasless Mild Steel MIG Welding Wire 0.030″ 10-lb Spool
WeldingCity E71T-GS Flux-Core Gasless Mild Steel MIG Welding Wire 0.030″ 10-lb Spool #ad - Specifications aws a520/asme sf a520/e71t-gs 10-lb weight of welding wire 8-in spool, 2-in center hole. Features self-shielded no welding protection gases needed single-pass fillet and lap welding wrapped in vacuumed aluminum foil. Premium quality flux-cored gasless e71t-gs mild steel mig welding wire 10-lb roll. Available wire diameters 0030″, 0035″ and 0045″. Package of one (1) gasless welding wire spool us based welding supplier strong technical support with experienced customer service to address buyer’s any question.

 

035 Inch E71T-GS Flux Cored Gasless Welding Wire - 10 lb Spool #ad
.035 Inch E71T-GS Flux Cored Gasless Welding Wire – 10 lb Spool
.035 Inch E71T-GS Flux Cored Gasless Welding Wire – 10 lb Spool #ad - Flux cored. Self-shielded no welding protection gases needed. 10 lb spool. Aws classification e71t-gs. Wire diameter 0035 in (09 mm).

 

Blue Demon ER4043 X 035 X 1LB Spool general purpose aluminum welding wire #ad
Blue Demon ER4043 X .035 X 1LB Spool general purpose aluminum welding wire
Blue Demon ER4043 X .035 X 1LB Spool general purpose aluminum welding wire #ad - It has a bright weld finished making it a popular choice for welders. It contains silicon additives which result in improved fluidity of the weld pool. Applications include welding filler wire and spray and flame metalizing wire.

 

INEFIL ER70S-6 023-Inch on 10-Pound Spool Carbon Steel Mig Solid Welding Wire #ad
INEFIL ER70S-6 .023-Inch on 10-Pound Spool Carbon Steel Mig Solid Welding Wire
INEFIL ER70S-6 .023-Inch on 10-Pound Spool Carbon Steel Mig Solid Welding Wire #ad - Made in italy from the finest quality materials using state of the art technology under highly respected labor conditions. Mig solid welding wire for carbon and carbon-manganese steels. Low spatter, high feedability, porosity free, good bead appearance, easy to weld. Shielding gas is required 80-percent ar+20-percent co2 or 100-percent co2,all positions, single and multi pass welding. Approvals abs, tuv, db, dnv, lrs, rina, gl.

 

Kiswel USA K-NGS E-71TGS 0030in Dia 10lb Gasless-Flux Core Wire Welding wire Made in USA #ad
Kiswel USA K-NGS E-71TGS 0.030in. Dia 10lb. Gasless-Flux Core Wire Welding wire Made in USA
Kiswel USA K-NGS E-71TGS 0.030in. Dia 10lb. Gasless-Flux Core Wire Welding wire Made in USA #ad - Nec article 630 electric welders, meets sae j1127 and astm b-172 standards rohs compliant. 150 max amps (up to 50 feet), rated up to 600 volts, -50°c to +105°c (-58°f to +221°f). Temco easy-flex has a rugged epdm jacket and is highly flexible annealed 30 gauge bare copper conductor. Resistant to cuts, tears, abrasion, water, oil, grease and flame. Nominal od 0331″, conductor stranding 364/31.

 

INEFIL ER70S-6 030-Inch on 10-Pound Spool Carbon Steel Mig Solid Welding Wire #ad
INEFIL ER70S-6 .030-Inch on 10-Pound Spool Carbon Steel Mig Solid Welding Wire
INEFIL ER70S-6 .030-Inch on 10-Pound Spool Carbon Steel Mig Solid Welding Wire #ad - Approvals abs, tuv, db, dnv, lrs, rina, gl. Mig solid welding wire for carbon and carbon-manganese steels. Made in italy from the finest quality materials using state of the art technology under highly respected labor conditions. Shielding gas is required 80-percent ar+20-percent co2 or 100-percent co2,all positions, single and multi pass welding. Low spatter, high feedability, porosity free, good bead appearance, easy to weld.

 

HB6008 Mig Welding Wire 70S-6 035 X 10 - 11 Lbs #ad
HB6008 Mig Welding Wire 70S-6 (.035 X 10#) – 11 Lbs
HB6008 Mig Welding Wire 70S-6 (.035 X 10#) – 11 Lbs #ad - Package of one (1-pk), two (2-pk) and five (5-pk) er308l mig welding wire 2-lb spools available us based welding supplier strong technical support with experienced customer service to address buyer’s any question. Features and applications for mig (gmaw) welding process for 304, 304l, 308, 308l, 321 and 347 stainless steels with a carbon content held to a max of 03% to to reduce the possibility of intergranular carbide precipitation most popular stainless wire for general-purpose applications where corrosion is moderate and applications at cryogenic temperatures shielding gas required, usually argon/co2 mix. Specification aws a59/asme sfa a59/er308l 2-lb net weight of stainless steel welding wire 4″ spool wrapped in moisture-resistant plastic film typical deposited chemical composition % c=002, si=032, mn=170, p=001, s=0009, cr=200, ni=10, remain=fe. Available wire diameters 0023″ (06mm), 0030″ (08mm), 0035″ (09mm), 0045″ (12mm). Premium quality er308l stainless steel mig welding wire 2-lb spool.

 

Blue Demon 308LT14 X 035 X 11LB Spool stainless steel flux core gas shielded welding wire #ad
Blue Demon 308LT1/4 X .035 X 11LB Spool stainless steel flux core gas shielded welding wire
Blue Demon 308LT1/4 X .035 X 11LB Spool stainless steel flux core gas shielded welding wire #ad - It may be used for welding types 321 and 347 if service temperature does not exceed 500f. Specification aws a522 gmaw-dcep. This wire provides excellent weldability and increased creep resistance at elevated temperatures.

 

Harris 05356F5 5356 Aluminum MIG Welding Wire 0035 x 5 lb Spool #ad
Harris 05356F5 5356 Aluminum MIG Welding Wire, 0.035″ x 5 lb. Spool
Harris 05356F5 5356 Aluminum MIG Welding Wire, 0.035″ x 5 lb. Spool #ad - It is the most widely used of all aluminum fillers metals. Common applications are welding of boats/ships, bicycles, trucks, pressure vessels and automotive parts. Alloy 5356 is an all position non-heat treatable mig wire used to weld the 5xxx series alloys when 40,000 psi tensile strength is not a requirement. 5356 is a very good all purpose wire.

 

WeldingCity USA Made Gasless Flux Core E71T-GS 10-Lb Spool 0035 Mild Steel MIG Welding Wire #ad
WeldingCity USA Made Gasless Flux Core E71T-GS 10-Lb Spool 0.035″ Mild Steel MIG Welding Wire
WeldingCity USA Made Gasless Flux Core E71T-GS 10-Lb Spool 0.035″ Mild Steel MIG Welding Wire #ad - Package of one (1) gasless welding wire spool us based welding supplier strong technical support with experienced customer service to address buyer’s any question. Specifications aws a520/asme sf a520/e71t-gs 0035″ wire dia 10-lb weight of welding wire 8-in spool, 2-in center hole. Features self-shielded no welding protection gases needed single-pass fillet and lap welding packaged in vacuumed and moisture-resistant plastics film. Usa made premium quality flux-cored gasless e71t-gs 0035″ mild steel mig welding wire 10-lb roll.

 

INEFIL ER70S-6 035-Inch on 10-Pound Spool Carbon Steel Mig Solid Welding Wire #ad
INEFIL ER70S-6 .035-Inch on 10-Pound Spool Carbon Steel Mig Solid Welding Wire
INEFIL ER70S-6 .035-Inch on 10-Pound Spool Carbon Steel Mig Solid Welding Wire #ad - Shielding gas is required 80-percent ar+20-percent co2 or 100-percent co2,all positions, single and multi pass welding. Mig solid welding wire for carbon and carbon-manganese steels. Low spatter, high feedability, porosity free, good bead appearance, easy to weld. Made in italy from the finest quality materials using state of the art technology under highly respected labor conditions. Approvals abs, tuv, db, dnv, lrs, rina, gl.

 

ACDC WIRE 6 Gauge 6 AWG Welding Battery Pure Copper Flexible Cable Wire - Car Inverter RV Trucks 10 ft BLACK  10 ft RED #ad
AC/DC WIRE 6 Gauge 6 AWG Welding Battery Pure Copper Flexible Cable Wire – Car, Inverter, RV, Trucks (10 ft BLACK + 10 ft RED)
AC/DC WIRE 6 Gauge 6 AWG Welding Battery Pure Copper Flexible Cable Wire – Car, Inverter, RV, Trucks (10 ft BLACK + 10 ft RED) #ad - Sae j1127 standard requires a minimum amount of copper. Higher tensile strength. Made in the usa. Passes the sae flame test. Operating temperatures range from -50°c to +105°c (-58°f to +221°f). Highly flexible annealed 30 gauge bare copper conductor, insulated with an epdm jacket and paper separator. Rated to 600 volts resists abrasion, cut, tear, flame, grease, oil and water rohs compliant. Rugged jacket and highly flexible. Passes exposure to oils and fluids including gasoline, oil, engine coolant, acid, power steering fluid, diesal, transmission fluid, and ethanol.

 

INETUB BA71TGS 035-Inch on 10-Pound Spool Carbon Steel Gasless Flux Cored Welding Wire #ad
INETUB BA71TGS .035-Inch on 10-Pound Spool Carbon Steel Gasless Flux Cored Welding Wire
INETUB BA71TGS .035-Inch on 10-Pound Spool Carbon Steel Gasless Flux Cored Welding Wire #ad - Made in italy from the finest quality materials using state of the art technology under highly respected labour conditions. Shielding gas is not required, all positions, single and multi pass welding. Gasless flux cored welding wire aws e71t-gs, smooth arc action, high feedability, easy to weld. Low spatter, full slag coverage, easy slag removal, porosity free, good bead appearance.

 

Harris 0308LE5 308L Welding Wire Stainless Steel Spool 0030 x 10 lb #ad
Harris 0308LE5 308L Welding Wire, Stainless Steel Spool, 0.030″ x 10 lb.
Harris 0308LE5 308L Welding Wire, Stainless Steel Spool, 0.030″ x 10 lb. #ad - Similar usage as 308, but the. 03% maximum carbon content increases resistance to inter-granular corrosion.

 

2 Rolls ER70S-6 023 030 035 10-LB Spool Mild Steel MIG Welding Wire 2 Rolls of 0035 #ad
2 Rolls ER70S-6 .023″ .030″ .035″ 10-LB Spool Mild Steel MIG Welding Wire (2 Rolls of 0.035″)
2 Rolls ER70S-6 .023″ .030″ .035″ 10-LB Spool Mild Steel MIG Welding Wire (2 Rolls of 0.035″) #ad - 18-05 er70s-6 2 spools of 0. 045″ x 10 lbs typical chemical composition of wire (%) c 0. Aws a5. 07 / si 0. S 550 mpa / el 30% / iv at -30 c 70 j. 007 typical mechanical properties of all-weld metal y. 035″ 0. 86 / mn 1. S 450 mpa / t. 030″ 0. 023″ 0. 53 / p 0. 012 / s 0.

 

Hobart H381806-R18 1-Pound ER4043 Aluminum Welding Wire 0030-Inch #ad
Hobart H381806-R18 1-Pound ER4043 Aluminum Welding Wire, 0.030-Inch
Hobart H381806-R18 1-Pound ER4043 Aluminum Welding Wire, 0.030-Inch #ad - It can be used to weld various grades of aluminum. Its bright weld finish makes it a popular choice of welders. A general-purpose type aluminum welding wire.

 

Lincoln Electric SuperArc L-56 MIG Welding Wire - Mild Steel Copper Coated025in 2-Lb Spool Model Number ED030583 #ad
Lincoln Electric SuperArc L-56 MIG Welding Wire – Mild Steel, Copper Coated.025in, 2-Lb. Spool, Model Number ED030583
Lincoln Electric SuperArc L-56 MIG Welding Wire – Mild Steel, Copper Coated.025in, 2-Lb. Spool, Model Number ED030583 #ad - Lincoln electric superarc l-56 premium copper-coated mig welding wire offers superior feedability and excellent arc characteristics for exceptional welding results. ). ) 2, compatible with mig welders. Wire material copper-coated mig wire, welding processes welding on metals with a medium to high presence of millscale, product type welding wire, wire size (in. 025, weight (lbs.

 

LINCOLN ELECTRIC CO  ED031448 030 NR-211 Lb Spool Inner Shield Flux-Core Welding Wire #ad
LINCOLN ELECTRIC CO ED031448 .030 NR-211, Lb Spool, Inner Shield Flux-Core Welding Wire
LINCOLN ELECTRIC CO ED031448 .030 NR-211, Lb Spool, Inner Shield Flux-Core Welding Wire #ad - 030, container 1. 0 lb. 7 mm (1/2 in. Mig welding wire, inner shield nr-211-mp , mild steel flux-core, dia. Spool, min. 9 mm (5/16 in. ) To 12. Tensile strength (psi) 70, plate thicknesses in the range of 7. ). ), Applications with copper back-up, sheet or thin gauge metal, propane cylinders and robotics/hard automation. (In.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.