24 Coolest Fuel Tips

 

FlameTech SC-TEF-5 Single Orifice Copper Tip End Fuel Brazing for use with Torch Handle Mixer and BGN Gooseneck Size 5 Tested in the USA #ad
FlameTech SC-TEF-5 Single Orifice Copper Tip End Fuel Brazing for use with Torch Handle, Mixer and BGN Gooseneck, Size 5, Tested in the USA
FlameTech SC-TEF-5 Single Orifice Copper Tip End Fuel Brazing for use with Torch Handle, Mixer and BGN Gooseneck, Size 5, Tested in the USA #ad - These tef tip will flow from 25 to 50 percent more gas than single orifice welding tips designed for acetylene before becoming unstable and blowing away from the tip. Flametech’s the tef (tip end fuel) gas brazing tip is designed to overcome most of the problems encountered while brazing with fuel gases. It is available in size 5.

 

G03 2 Propane LPG Natural Gas Tip for Oxyfuel Cutting Machines Compatible with Airco Tanaka Koike #ad
G03 #2 Propane, LPG, Natural Gas Tip for Oxyfuel Cutting Machines Compatible with Airco, Tanaka, Koike
G03 #2 Propane, LPG, Natural Gas Tip for Oxyfuel Cutting Machines Compatible with Airco, Tanaka, Koike #ad - Compatible with airco, tanaka and koike lpg, propane and natural gas cutting torches. This is the standard tip used with oxyfuel cutting machines like pantographs, straight line cutters and pipe beveling/cutting machines. Package of 1 tip.

 

FlameTech S-TEF-3 Single Orifice Tip End Fuel Brazing for use with Torch Handle Mixer and BGN Gooseneck Size 3 Tested in the USA #ad
FlameTech S-TEF-3 Single Orifice Tip End Fuel Brazing for use with Torch Handle, Mixer and BGN Gooseneck, Size 3, Tested in the USA
FlameTech S-TEF-3 Single Orifice Tip End Fuel Brazing for use with Torch Handle, Mixer and BGN Gooseneck, Size 3, Tested in the USA #ad - These tef tip will flow from 25 to 50 percent more gas than single orifice welding tips designed for acetylene before becoming unstable and blowing away from the tip. Flametech’s the tef (tip end fuel) gas brazing tip is designed to overcome most of the problems encountered while brazing with fuel gases. It is available in size 3.

 

G03 3 Propane LPG Natural Gas Tip for Oxyfuel Cutting Machines Compatible with Airco Tanaka Koike #ad
G03 #3 Propane, LPG, Natural Gas Tip for Oxyfuel Cutting Machines Compatible with Airco, Tanaka, Koike
G03 #3 Propane, LPG, Natural Gas Tip for Oxyfuel Cutting Machines Compatible with Airco, Tanaka, Koike #ad - This is the standard tip used with oxyfuel cutting machines like pantographs, straight line cutters and pipe beveling/cutting machines. Package of 1 tip. Compatible with airco, tanaka and koike lpg, propane and natural gas cutting torches.

 

FlameTech S-TEF-2 Single Orifice Tip End Fuel Brazing for use with Torch Handle Mixer and BGN Gooseneck Size 2 Tested in the USA #ad
FlameTech S-TEF-2 Single Orifice Tip End Fuel Brazing for use with Torch Handle, Mixer and BGN Gooseneck, Size 2, Tested in the USA
FlameTech S-TEF-2 Single Orifice Tip End Fuel Brazing for use with Torch Handle, Mixer and BGN Gooseneck, Size 2, Tested in the USA #ad - Flametech’s the tef (tip end fuel) gas brazing tip is designed to overcome most of the problems encountered while brazing with fuel gases. These tef tip will flow from 25 to 50 percent more gas than single orifice welding tips designed for acetylene before becoming unstable and blowing away from the tip. It is available in size 2.

 

FlameTech SC-TEF-7 Single Orifice Copper Tip End Fuel Brazing for use with Torch Handle Mixer and BGN Gooseneck Size 7 Tested in the USA #ad
FlameTech SC-TEF-7 Single Orifice Copper Tip End Fuel Brazing for use with Torch Handle, Mixer and BGN Gooseneck, Size 7, Tested in the USA
FlameTech SC-TEF-7 Single Orifice Copper Tip End Fuel Brazing for use with Torch Handle, Mixer and BGN Gooseneck, Size 7, Tested in the USA #ad - It is available in size 7. These tef tip will flow from 25 to 50 percent more gas than single orifice welding tips designed for acetylene before becoming unstable and blowing away from the tip. Flametech’s the tef (tip end fuel) gas brazing tip is designed to overcome most of the problems encountered while brazing with fuel gases.

 

Gas Cutting Torch USA Style 62 HEAVY DUTY CUTTING TORCH 18 475mm Length for Use with All Fuel Gases with Tips 6290 6290NX 1 Set Torch Kit #ad
Gas Cutting Torch USA Style 62 HEAVY DUTY CUTTING TORCH 18″ 475mm Length for Use with All Fuel Gases with Tips 6290 6290NX (1 Set Torch Kit)
Gas Cutting Torch USA Style 62 HEAVY DUTY CUTTING TORCH 18″ 475mm Length for Use with All Fuel Gases with Tips 6290 6290NX (1 Set Torch Kit) #ad - It can produce the hottest flame possible at the lowest gas pressure (4 oz, 2 psig) making it the safest, most efficient design in the industry. The torch #62 is an industry standard that is less expensive to own and operate, and is safer to use. Its triangular tube design and brazed connections offer strength, safety and a long service life. Cutting tip compatible 6290, 6290nx, etc. The torch #62 is a heavy duty straight cutting torch designed to use any fuel gas.

 

GENTEC 10CMP-6SP Oxy-AcetyleneOxy-Fuel Tips #ad
GENTEC 10CMP-6SP Oxy-Acetylene/Oxy-Fuel Tips
GENTEC 10CMP-6SP Oxy-Acetylene/Oxy-Fuel Tips #ad - Size 6. Gas service oxy-acetylene, propane, mapp®.

 

FlameTech SC-TEF-6 Single Orifice Copper Tip End Fuel Brazing for Use with Torch Handle Mixer and BGN Gooseneck Size 6 Tested in the USA #ad
FlameTech SC-TEF-6 Single Orifice Copper Tip End Fuel Brazing for Use with Torch Handle, Mixer and BGN Gooseneck, Size 6, Tested in the USA
FlameTech SC-TEF-6 Single Orifice Copper Tip End Fuel Brazing for Use with Torch Handle, Mixer and BGN Gooseneck, Size 6, Tested in the USA #ad - It is available in size 6. Flametech’s the tef (tip end fuel) gas brazing tip is designed to overcome most of the problems encountered while brazing with fuel gases. These tef tip will flow from 25 to 50 percent more gas than single orifice welding tips designed for acetylene before becoming unstable and blowing away from the tip.

 

FlameTech S-TEF-8 Single Orifice Tip End Fuel Brazing for use with Torch Handle Heavy Duty Mixer and BGNH Gooseneck Size 8 Tested in the USA #ad
FlameTech S-TEF-8 Single Orifice Tip End Fuel Brazing for use with Torch Handle, Heavy Duty Mixer and BGNH Gooseneck, Size 8, Tested in the USA
FlameTech S-TEF-8 Single Orifice Tip End Fuel Brazing for use with Torch Handle, Heavy Duty Mixer and BGNH Gooseneck, Size 8, Tested in the USA #ad - Flametech’s the tef (tip end fuel) gas brazing tip is designed to overcome most of the problems encountered while brazing with fuel gases. It is available in size 8. These tef tip will flow from 25 to 50 percent more gas than single orifice welding tips designed for acetylene before becoming unstable and blowing away from the tip.

 

FlameTech S-TEF-5 Single Orifice Tip End Fuel Brazing for use with Torch Handle Mixer and BGN Gooseneck Size 5 Tested in the USA #ad
FlameTech S-TEF-5 Single Orifice Tip End Fuel Brazing for use with Torch Handle, Mixer and BGN Gooseneck, Size 5, Tested in the USA
FlameTech S-TEF-5 Single Orifice Tip End Fuel Brazing for use with Torch Handle, Mixer and BGN Gooseneck, Size 5, Tested in the USA #ad - These tef tip will flow from 25 to 50 percent more gas than single orifice welding tips designed for acetylene before becoming unstable and blowing away from the tip. It is available in size 5. Flametech’s the tef (tip end fuel) gas brazing tip is designed to overcome most of the problems encountered while brazing with fuel gases.

 

GENTEC 10STP-4SP Oxy-AcetyleneOxy-Fuel curved tips #ad
GENTEC 10STP-4SP Oxy-Acetylene/Oxy-Fuel curved tips
GENTEC 10STP-4SP Oxy-Acetylene/Oxy-Fuel curved tips #ad - Gentec 10stp-4sp oxy-acetylene/oxy-fuel curved tips.

 

FlameTech SC-TEF-4 Single Orifice Copper Tip End Fuel Brazing for use with Torch Handle Mixer and BGN Gooseneck Size 4 Tested in the USA #ad
FlameTech SC-TEF-4 Single Orifice Copper Tip End Fuel Brazing for use with Torch Handle, Mixer and BGN Gooseneck, Size 4, Tested in the USA
FlameTech SC-TEF-4 Single Orifice Copper Tip End Fuel Brazing for use with Torch Handle, Mixer and BGN Gooseneck, Size 4, Tested in the USA #ad - It is available in size 4. These tef tip will flow from 25 to 50 percent more gas than single orifice welding tips designed for acetylene before becoming unstable and blowing away from the tip. Flametech’s the tef (tip end fuel) gas brazing tip is designed to overcome most of the problems encountered while brazing with fuel gases.

 

FlameTech S-TEF-00 Single Orifice Tip End Fuel Brazing for use with Torch Handle Mixer and BGN Gooseneck Size 00 Tested in the USA #ad
FlameTech S-TEF-00 Single Orifice Tip End Fuel Brazing for use with Torch Handle, Mixer and BGN Gooseneck, Size 00, Tested in the USA
FlameTech S-TEF-00 Single Orifice Tip End Fuel Brazing for use with Torch Handle, Mixer and BGN Gooseneck, Size 00, Tested in the USA #ad - Flametech’s the tef (tip end fuel) gas brazing tip is designed to overcome most of the problems encountered while brazing with fuel gases. It is available in size 00. These tef tip will flow from 25 to 50 percent more gas than single orifice welding tips designed for acetylene before becoming unstable and blowing away from the tip.

 

G03 1 Propane LPG Natural Gas Tip for Oxyfuel Cutting Machines Compatible with Airco Tanaka Koike #ad
G03 #1 Propane, LPG, Natural Gas Tip for Oxyfuel Cutting Machines Compatible with Airco, Tanaka, Koike
G03 #1 Propane, LPG, Natural Gas Tip for Oxyfuel Cutting Machines Compatible with Airco, Tanaka, Koike #ad - Compatible with airco, tanaka and koike lpg, propane and natural gas cutting torches. Package of 1 tip. This is the standard tip used with oxyfuel cutting machines like pantographs, straight line cutters and pipe beveling/cutting machines.

 

FlameTech S-TEF-7 Single Orifice Tip End Fuel Brazing for use with Torch Handle Mixer and BGN Gooseneck Size 7 Tested in the USA #ad
FlameTech S-TEF-7 Single Orifice Tip End Fuel Brazing for use with Torch Handle, Mixer and BGN Gooseneck, Size 7, Tested in the USA
FlameTech S-TEF-7 Single Orifice Tip End Fuel Brazing for use with Torch Handle, Mixer and BGN Gooseneck, Size 7, Tested in the USA #ad - These tef tip will flow from 25 to 50 percent more gas than single orifice welding tips designed for acetylene before becoming unstable and blowing away from the tip. It is available in size 7. Flametech’s the tef (tip end fuel) gas brazing tip is designed to overcome most of the problems encountered while brazing with fuel gases.

 

G03 4 Propane LPG Natural Gas Tip for Oxyfuel Cutting Machines Compatible with Airco Tanaka Koike #ad
G03 #4 Propane, LPG, Natural Gas Tip for Oxyfuel Cutting Machines Compatible with Airco, Tanaka, Koike
G03 #4 Propane, LPG, Natural Gas Tip for Oxyfuel Cutting Machines Compatible with Airco, Tanaka, Koike #ad - Package of 1 tip. Compatible with airco, tanaka and koike lpg, propane and natural gas cutting torches. This is the standard tip used with oxyfuel cutting machines like pantographs, straight line cutters and pipe beveling/cutting machines.

 

FlameTech SC-TEF-00 Single Orifice Copper Tip End Fuel Brazing for use with Torch Handle Mixer and BGN Gooseneck Size 00 Tested in the USA #ad
FlameTech SC-TEF-00 Single Orifice Copper Tip End Fuel Brazing for use with Torch Handle, Mixer and BGN Gooseneck, Size 00, Tested in the USA
FlameTech SC-TEF-00 Single Orifice Copper Tip End Fuel Brazing for use with Torch Handle, Mixer and BGN Gooseneck, Size 00, Tested in the USA #ad - Flametech’s the tef (tip end fuel) gas brazing tip is designed to overcome most of the problems encountered while brazing with fuel gases. It is available in size 00. These tef tip will flow from 25 to 50 percent more gas than single orifice welding tips designed for acetylene before becoming unstable and blowing away from the tip.

 

GENTEC 10STP-65SP Oxy-AcetyleneOxy-Fuel curved tips #ad
GENTEC 10STP-65SP Oxy-Acetylene/Oxy-Fuel curved tips
GENTEC 10STP-65SP Oxy-Acetylene/Oxy-Fuel curved tips #ad - Gentec 10stp-65sp oxy-acetylene/oxy-fuel curved tips.

 

GENTEC 10CMP-3SP Oxy-AcetyleneOxy-Fuel Tips #ad
GENTEC 10CMP-3SP Oxy-Acetylene/Oxy-Fuel Tips
GENTEC 10CMP-3SP Oxy-Acetylene/Oxy-Fuel Tips #ad - Size 3. Gas service oxy-acetylene, propane, mapp®.

 

GENTEC 10STP-5SP Oxy-AcetyleneOxy-Fuel curved tips #ad
GENTEC 10STP-5SP Oxy-Acetylene/Oxy-Fuel curved tips
GENTEC 10STP-5SP Oxy-Acetylene/Oxy-Fuel curved tips #ad - Gentec 10stp-5sp oxy-acetylene/oxy-fuel curved tips.

 

FlameTech SC-TEF-8 Single Orifice Copper Tip End Fuel Brazing for use with Torch Handle HD Mixer and BGNH Gooseneck Size 8 Tested in the USA #ad
FlameTech SC-TEF-8 Single Orifice Copper Tip End Fuel Brazing for use with Torch Handle, HD Mixer and BGNH Gooseneck, Size 8, Tested in the USA
FlameTech SC-TEF-8 Single Orifice Copper Tip End Fuel Brazing for use with Torch Handle, HD Mixer and BGNH Gooseneck, Size 8, Tested in the USA #ad - It is available in size 8. Flametech’s the tef (tip end fuel) gas brazing tip is designed to overcome most of the problems encountered while brazing with fuel gases. These tef tip will flow from 25 to 50 percent more gas than single orifice welding tips designed for acetylene before becoming unstable and blowing away from the tip.

 

FlameTech S-TEF-4 Single Orifice Tip End Fuel Brazing for use with Torch Handle Mixer and BGN Gooseneck Size 4 Tested in the USA #ad
FlameTech S-TEF-4 Single Orifice Tip End Fuel Brazing for use with Torch Handle. Mixer and BGN Gooseneck, Size 4, Tested in the USA
FlameTech S-TEF-4 Single Orifice Tip End Fuel Brazing for use with Torch Handle. Mixer and BGN Gooseneck, Size 4, Tested in the USA #ad - It is available in size 4. These tef tip will flow from 25 to 50 percent more gas than single orifice welding tips designed for acetylene before becoming unstable and blowing away from the tip. Flametech’s the tef (tip end fuel) gas brazing tip is designed to overcome most of the problems encountered while brazing with fuel gases.

 

Turbo Torch 0386-0105 A-14 Air Fuel Tips #ad
Turbo Torch 0386-0105 A-14 Air Fuel Tips
Turbo Torch 0386-0105 A-14 Air Fuel Tips #ad - Gas flow 145 @ 14 psi scfh, 123 @ (09 bar) m3/hr. Process air acetylene. Tip size 1/2 in (127 mm). Soft solder 2, 3 1/2 in (50-90 mm),silver braze 1, 2 in (30-50 mm).





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.