FIT TOOLS Made in Taiwan 1/2″ Heavy Duty Dr. Pneumatic Impact Wrench with CR-V Sockets Kit - Air inlet 1/4″ 9. Digital torque 470 ft / lbs (630nm) 5. The max. Working pressure 90 psi (6. Free speed 5500 rpm 6. 24. 13. 11. Max. Working torque range 60, 700 ft / lbs (80-950nm) 3. 14. Specification of air impact wrench 1. 17. Torque is 780 ft / lbs (1055 nm) 8 position for tightening selection. 2 bar) 8. Key wrench 1 pcs blow mold case. Air cons 4. 27mm) 1 pcs 5″ extension bar 1 pcs mini oiler 1 pcs nipple 1 pcs l type 4mm hex. Air hose 3/8″ id contents 1 pcs 1/2″ heavy duty impact wrench 10 pcs 1/2″ impact cr-v sockets (9. 10. 19. 5 cfm 7. Square drive 1/2 ” 2. 22. Torque 780 ft / lbs (1055 nm) 4. Our 1/2″ air impact wrench of this set is low weight but with high torque. Avg.
Taylor Pneumatic: 3/4″ Heavy Duty Impact Wrench: Belt:1″ Sq. Dr. 3/4″. 90PSI. Torque: 900ft lb. - Exhaust is through the bottom of the handle and away from operator. Bolt capacity 1″ square drive 3/4″ max torque 900 ft lbs length 10-3/4″. Weight 11-1/2 lbs air pressure 90 psi. A precision impact clutch & motor for long life under heave duty conditions & a build in regulator.
Performance Tool M627 3/4-Inch Drive Heavy Duty Impact Wrench by Performance Tool - Craftsman® heavy-duty impact wrench, 1/2″ drive. Tools and tool storage. Model number 009-19984|uom ea.
Craftsman C3 19.2 Volt 1/2″ Heavy Duty Impact Wrench (Tool Only – Bulk Packaged) - The 3 built-in led lights shine bright for maximum visibility. The micro-texture overmold grip increases comfort and control. Of torque can be achieved when using an xcp li-ion high capacity battery. Up to 300 ft-lbs. Bulk packaged, no retail box. The business end has a 1/2-in. Square anvil with detent pin retention. The robust motor provides 0-3,000 rpm/ipm. Tool only, battery and charger not included. This impact wrench is not just powerful, but convenient, flashy, and comfortable to use. Break-free the tightest nuts and drive the thickest bolts with ease.
Ingersoll-Rand 285B 1″ Heavy Duty Impact Wrench - Torque (ft. ) 1,475, cfm at load 37, variable speed yes, inlet size (in. ) 24. Free speed is 5000 rpm. ) 1, working torque (ft. ) 1/2, speed, no load (rpm) 5,000, average air consumption (cfm) 10, drive (in. 6 vane motor generates10 cfm/37 cfm @ load. 360deg swivel inlet 3-position power regulator super balance angle down exhaust. -Lbs. Hose size (in. ) 13 3/16, noise level (db) 103. At 750 blows per minute. 6, operating psi 120, max. 4, min. ) 1/2, standard bolt capacity (in. -Lbs. This powerful air impact wrench delivers a working torque of 100-1000 ft. Model 285a impacts per minute (ipm) 750, tool weight (lbs. -Lb. ) 1 1/4, tool length (in. ) 100-900. High-efficiency.
Craftsman C3 ½” Heavy Duty Impact Wrench Kit Powered By 4ah XCP Cordless Tools High Torque - Don’t get tied down with cords and hoses, experience battery operated freedom without losing power, with the craftsman c3 19. Not to mention, xcp adds up to 4x longer runtime over a ni-cd battery, all while providing better tool performance. Square anvil with detent pin retention up to 3,000 impacts per minute up to 300 ft-lbs. Break-free the tightest nuts and drive the thickest bolts with ease. Of torque. Of torque for heavy duty applications built-in 3-led lights illuminates dark work areas to maximize visibility micro-texture overmold grip for added user comfort and improved tactile control. Heavy duty no problem. To top it all off, this battery can operate in extreme weather conditions from 5 all the way up 158 degrees. The micro-texture overmold grip increases comfort and control. Time to get the job done right unleash the power of craftsman c3 and xcp with the craftsman c3 19. 2-volt xcp impact wrench kit perfect for the garage or automotive user, power is the key word when it comes to this impact wrench kit. The included 4ah xcp lithium-ion battery takes this kit to the extreme. This motor also boasts a beastly 300 ft-lbs. When it’s time to charge the battery, the included multi-chemistry charger will have you back to work in no time the 3 built-in led lights shine bright for maximum visibility. 2-volt xcp lithium-ion impact wrench kit powerful motor produces 0-3,000 rpm for tightening or loosening nuts and bolts 4 amp-hour xcp lithium-ion battery pack provides up to 4x runtime, up to 20% more torque 1/2-in. Xcp technology delivers more power while increasing torque by 20%. The robust motor provides 0-3,000 rpm/ipm. This impact wrench is not just powerful, but convenient, flashy, and comfortable to use.
SP Air Corporation SP-1194-6 Heavy-Duty Impact Wrench with 6″ Extended Anvil, 1″ - 1,800 ft/lb max torque, higher torque for stubborn fasteners and lightweight aluminum housing weighing 15 lbs. 3 speed positions control gives more control when tightening fasteners, full power reverse for easier removing of fasteners. Sealed-in oil bath lubrication always keeps impact mechanism lubricated for less wear and longer tool life. Auxiliary side handle is adjustable to any angle for maximum control made in japan. Twin hammer mechanism is durable and hard hitting using fewer parts and less down time.
Ingersoll-Rand 2130-2 Heavy Duty 1/2-Inch Impact Pnuematic Wrench with 2-Inch Extended Anvil - • Ideal for tire changing and use with flip sockets. • 550 ft. Of maximum torque • full stroke tease throttle • easy glide forward/reverse switch • multi position power management • lightweight reinforced aluminum hammercase. -Lbs. Featuring a 2″ extended anvil, this impact features a powerful twin hammer mechanism and a new composite housing, yielding superior ergonomics in a lightweight package.
FIT TOOLS 1/2″ Heavy Duty Dr. Pneumatic Impact Wrench - 2 bar) 8. Working torque range 60, 700 ft / lbs (80-950nm) 3. Specification 1. Our 1/2 ” air impact wrench is low weight but with high torque. Air cons 4. Working pressure 90 psi (6. Digital torque 470 ft / lbs (630nm) 5. 5 cfm 7. Torque is 780 ft / lbs (1055 nm) 8 position for tightening selection. Air inlet 1/4″ 9. Torque 780 ft / lbs (1055 nm) 4. Air hose 3/8″ id. The max. Max. Free speed 5500 rpm 6. Avg. Square drive 1/2 ” dr 2.
Ingersoll-Rand 211 Heavy Duty 3/8-Inch Pnuematic Impact Wrench - 5 cfm (71 l/min). -Average air consumption 2. 6”. 4 pounds. Generic specifications -sound (pressure/power) 104/117 dba. Torque. Anvil length -standard anvil. Max torque (ft-lb) -0, 199 ft-lb. Overall product weight -2. Dimensions overall depth, front to back -6. -Lbs. -Up to 150 ft. -Length 6. Generic dimensions -weight 2. 6 inches. 211 features -air impact wrench. Air comsumption (cfm) -0, 5. 40 lbs. -Steel hammer case protects the hammer mechanism against punishing use. Square drive size -3/8″.
STEELMAN 2712 3/8-Inch Drive Heavy-Duty Impact Wrench - Max torque, 200 foot-pound. Built-in regulator allows the operator to match the required power to the job. Positive action trigger for precise control. High torque, low vibration. Handle exhaust reduces noise and directs air away from the work area.
Chicago Pneumatic CP724H 3/8-Inch Drive Heavy Duty Impact Wrench - Improved oil bath dyna-pact clutch delivers higher performance and extended durability. Differential regulator allows the operator to match the required power. Ultimate torque 200 ft-lbs. Applications transmissions, exhaust systems, body shops, general repair in the 3/8-inch range. Handle exhaust directs air away from the workpiece and operator integral 360 degree air inlet swivel keeps air hose from being twisted and kinked.
Generic YC-AUS2-150922-111 Repairrench 1150 Impact Wrench 1150 Heavy Duty ft/lbs Maximum New 3/4″ Air Torque Auto Repair Heavy Duty - Description condition brand new product details features included brand new 3/4″ square drive composite air impact wrench max torque 1,150 ft/lb free speed 3,800rpm air inlet 3/8″ npt w/ 1/4″ adapter air pressure 6. 3 bar @ 90 psi rear exhaust, short shank, light weight suggested air compressor 2hp or above.
STEELMAN 2731 Silver/Black 1/2-Inch Heavy Duty Impact Wrench - Twin hammer with 400 foot-pound of torque offers excellent performance. Whether working at home or in a professional shop, the steelman twin hammer can assist with rotating tires or performing basic maintenance. It comes equipped with a twin hammer impact mechanism for 1/2-inch drive with an average air consumption of 4 cfm.
Craftsman Heavy-Duty Impact Wrench, 1/2″ Drive (3 Pack) - Provides over 580 ft/lb of torque. Its patented dynamic silencing system also offers high performance and a peaceful work environment. 5 lb. Other features include a swivel air inlet for freedom of movement. Powerful, quiet, smooth, and quick, this wrench features an oil-lubricated twin hammer system that weighs a comfortable 4.
Craftsman 9-19984 1/2-Inch Heavy Duty Impact Wrench - The double injected comfort grip and ergonomic throttle design provide added comfort. This lightweight composite impact features a hard hitting oil lubricated twin hammer hammering unit that produces over 580-foot pounds of torque.
8 PC Steel Constructed 1″ Impact Wrench Socket Set Heavy Duty Black Finish - Drop forged. Heat treated with black finish. Own this brand new high quality, heavy duty 8 pc 1″ socket set. Sizes 13/6″, 7/8″, 15/16″, 1-1/16″, 1-5/8″, 1-1/2″, 1-3/8″, 1-1/4″. This product is great for heavy duty application in the home, farm or shop and features steel sturdy construction.
FIT TOOLS 3/8″ Heavy Duty Dr. Pneumatic Impact Wrench - Square drive 3/8 ” dr 2. Max. Avg. Specification 1. Air hose 3/8″id. Digital torque 260 ft / lbs (350 nm) 5. Our 3/8 ” air impact wrench is low weight but with high torque. Working torque range 50, 300 ft / lbs (65-405nm) 3. Free speed 6500 rpm 6. The max. 2 bar) 8. Air inlet 1/4″ 9. Torque is 350 ft / lbs (475 nm) 8 position for tightening selection. Torque 350 ft / lbs (475 nm) 4. Working pressure 90 psi (6. 5 cfm 7. Air cons 4.
Generic orque Auto Re ft/lbs Maximum Auto Re Impact Wrench 1150 1150 Heavy Duty ench 1150 Torque Auto Repair w 3/4″ Air Im New 3/4″ Air - Description condition brand new product details features included brand new 3/4″ square drive composite air impact wrench max torque 1,150 ft/lb free speed 3,800rpm air inlet 3/8″ npt w/ 1/4″ adapter air pressure 6. 3 bar @ 90 psi rear exhaust, short shank, light weight suggested air compressor 2hp or above.
1″” Drive Heavy Duty Impact Wrench with 6″” Anvil Tools Equipment Hand Tools - This product meets the large package requirement per ups/fedex. The estimated shipping cost will include this fee. The 6″ anvil helps with leverage and getting into hard to reach places. Features and benefits maximum torque 1,770 ft. Not only will the irt285b-6 easily handle whatever task you put it to, the impact will also help you maneuver more comfortably thanks to its professional touch trigger, swept-back side handle for superior balance, and “angle-down” exhaust. /Lbs. New fast-torque feature delivers 1,000 ft. In 2 seconds new increased pressure rating can withstand 120 psi for better durability improved feather-touch trigger free chemical resistant protective boot helps prevent damage if you want exceptional power, durability, and ease-of-use from an impact wrench, the ingersoll-rand 285b delivers. /lbs.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.