18 Best Clamps

 

300 Amp Heavy Duty Arc Welding Ground Clamp for Welders by LifBetter
300 Amp Heavy Duty Arc Welding Ground Clamp for Welders by LifBetter
300 Amp Heavy Duty Arc Welding Ground Clamp for Welders by LifBetter - It’s a premium quality heavy duty welder clamp for arc welding. 300 amp, weight 53oz(150g), length 67inch(17cm). This welding ground clamp has a copper plated clamping surface and a strong spring. The extra copper strap on the inside will give it better contact. The rugged copper plated jaws will hold on to the work material and ensure that there is conductivity.

 

TEKTON 3815 Locking C-Clamp 6-Inch
TEKTON 3815 Locking C-Clamp, 6-Inch
TEKTON 3815 Locking C-Clamp, 6-Inch - Corrosion-resistant chrome plated finish. Precise tips reach into tight spaces or hold small parts. Knurled thumbscrew sets jaw capacity. One-handed grip and release action speeds up work. Forged and hardened steel jaws.

 

Astro 9406F Hose Clamp Clic-R Collar Pliers
Astro 9406F Hose Clamp Clic-R Collar Pliers
Astro 9406F Hose Clamp Clic-R Collar Pliers - One side of this unit is used to tighten the collar band. The other side is used to loosen the collar. The astro pneumatic 9406f hose clamp clic-r collar pliers allows bands to be reused.

 

IRWIN Tools VISE-GRIP Locking C-Clamp Original Swivel Pad Tip 4-inch 100mm 165 1-58” 41mm Jaw Capacity
IRWIN Tools VISE-GRIP Locking C-Clamp, Original, Swivel Pad Tip, 4-inch (100mm) (165); 1-5/8” (41mm) Jaw Capacity
IRWIN Tools VISE-GRIP Locking C-Clamp, Original, Swivel Pad Tip, 4-inch (100mm) (165); 1-5/8” (41mm) Jaw Capacity - Versatile wide-opening jaws clamp a variety of shapes guarded trigger provides quick release while helping prevent accidental releasejaw capacity of 1-5/8″ / 41 mm”. Swivel pads hold tapered work, awkward fabricating jobs, and delicate projects without damaging the work surface. Locking clamp is constructed of high-grade heat-treated alloy steel for maximum toughness and durability. Adjust pressure and work fit with turn screw that stays adjusted for repetitive use.

 

Knipex Tools 10 99 i220 875 Ear Clamp Pliers
Knipex Tools 10 99 i220 8.75″ Ear Clamp Pliers
Knipex Tools 10 99 i220 8.75″ Ear Clamp Pliers - For clamps on cv boots, coolant and fuel lines, air pressure systems, compressors. Durable and strong for long life. Suitable for simple and reliable clamping of 1-ear and 2-ear clamps without damaging the press points. An additional side jaw for easy clamping at degree angle to ear clamp when space is limited. High-grade special tool steel forged, oil-hardened.

 

IRWIN Tools VISE-GRIP Fast Release Locking C-Clamp Regular Tips 11-inch 19T
IRWIN Tools VISE-GRIP Fast Release Locking C-Clamp, Regular Tips, 11-inch (19T)
IRWIN Tools VISE-GRIP Fast Release Locking C-Clamp, Regular Tips, 11-inch (19T) - Irwin vise-grip clamp uses fast release that is easy to open with a no-trigger release and 1-hand operation. Fast release is 2x easier to open, has a no-pinch release and offers more finger room. Constructed of high-grade heat-treated alloy steel for maximum toughness and durability. Turn screw to adjust pressure and fit work stays adjusted for repetitive use. C-clamp has wide-opening jaws to provide greater versatility in clamping a variety of shapes. Wide-opening jaws provide greater versatility in clamping a variety of shapes. 3-3/8-inch jaw capacity. Turn screw on the clamp to adjust pressure and fit work stays adjusted for repetitive use. 11-inch size.

 

IRWIN Tools VISE-GRIP Pliers Hose Clamp 8-inch 1773627
IRWIN Tools VISE-GRIP Pliers, Hose Clamp, 8-inch (1773627)
IRWIN Tools VISE-GRIP Pliers, Hose Clamp, 8-inch (1773627) - Machined jaws provide maximum gripping strength induction hardened cutting edge stays sharp longer. Jaws are designed to easily install or remove wire spring tension clamps and the pliers also have a wire shearing feature. Features durable nickel chromium steel construction. The protouch grips provide extra comfort and reduce hand fatigue.

 

IRWIN VISE-GRIP Original Locking C-Clamp with Swivel Pads 18 22
IRWIN VISE-GRIP Original Locking C-Clamp with Swivel Pads, 18″, 22
IRWIN VISE-GRIP Original Locking C-Clamp with Swivel Pads, 18″, 22 - 8″-wide jaw opening provide greater versatility in clamping a variety of shapes. Locking clamp uses a turn screw to adjust pressure and fit work stays adjusted for repetitive use. Classic trigger release designed to provide maximum locking force. Swivel pads hold tapered work, awkward fabricating jobs, and delicate projects without damaging the work surface. Locking clamp is constructed of heat-treated alloy steel for maximum toughness and durability. Constructed of high-grade heat-treated alloy steel for durability. 8-inch jaw capacity. Turn screw adjusts pressure to fit work and stays adjusted for repetitive use. Irwin® locking clamp has wide-opening jaws for greater versatility in clamping a variety of shapes.

 

iClever 450A Peak 10000mAh Portable Car Jump Starter up to 45L Gas 30L Diesel Engine Battery Booster and Phone Charger with Smart Clamp
iClever 450A Peak 10000mAh Portable Car Jump Starter (up to 4.5L Gas, 3.0L Diesel Engine) Battery Booster and Phone Charger with Smart Clamp
iClever 450A Peak 10000mAh Portable Car Jump Starter (up to 4.5L Gas, 3.0L Diesel Engine) Battery Booster and Phone Charger with Smart Clamp - Geared for the glovebox compact and lightweight enough slip into your backpack and forget about. Smart starter safety iclever clamps down on safety with protections against over current, short circuit, voltage overload, and other voltage fluctuations clamps can jump start car engine 30 times on full power. Ultra-bright flashlight perfect for after dark disasters features 3 brightness settings full beam, sos and emergency strobe. Jump pack into action with 1 year of standby time and a peak current of 450a, this 10000mah car jump starter will set any automotive into motion up to 45l (gas) or 30l (diesel). One power bank fits all jump start your car, jump start your phone 10000mah battery doubles as a power bank with built-in 21a smartid usb port that that boosts batteries up to 2 times faster traditional power banks.

 

Lisle 30500 CV Boot Clamp Plier
Lisle 30500 CV Boot Clamp Plier
Lisle 30500 CV Boot Clamp Plier - Works on earless-type clamps including those found on gm inboard cv joints. A sturdy, low-cost tool.

 

MOTOPOWER MP68995 SAE to Alligator Clips Quick Disconnect Cable SAE to Battery Clamp Cable
MOTOPOWER MP68995 SAE to Alligator Clips Quick Disconnect Cable SAE to Battery Clamp Cable
MOTOPOWER MP68995 SAE to Alligator Clips Quick Disconnect Cable SAE to Battery Clamp Cable - 50amp fully insulated battery clamps (red& black). 18″ / 45cm long. Spt-2, 18awg red & black heavy duty copper wire. Convenient for hard-to-access batteries.

 

UniversalMercedesBMWAudiVW Collar Hose Clamp Pliers Clic and Clic-R Type
Universal/Mercedes/BMW/Audi/VW Collar Hose Clamp Pliers Clic and Clic-R Type
Universal/Mercedes/BMW/Audi/VW Collar Hose Clamp Pliers Clic and Clic-R Type - Monday to friday (orders placed before am800) will be shipped within 24 hours. Customer must contact us within 30 days after the purchasing. 2. Fees may apply if item is determined as not original condition. Warranty period 1 year3. Most of items which were marked “warranty” on the selling page apply to the warranty policy. 3. 20% restocking fee is non-refundable under any circumstances. ●Customer service:1. ● Warranty:1. 6. The warranty does not cover the defect was subjected to misuse, negligence or accident. 2. ● Shipping:1. 2. Buyers responsible for all custom and brokerage fees for shipments outside of the united states. 4. ●Specially designed jaws allow a quick change from installation to removal by simply turning pliers over. The warranty does not cover consumable parts. Ewk reserves the right of final decision. We will reply your message within 24~48 hours. 2. 3. The warranty only covers the defects under normal use. 5. 4. ●30 days money back guarantee: 1. Some item is not included. Orders placed after friday am800 or national holiday will be shipped on the coming business day. Item must be sellable condition with the original packaging. Office hours monday to friday 900am to 330pm (pacific time). Buyer should be responsible for the return freight.

 

Hobart 770565 Two Axis Welding Clamp
Hobart 770565 Two Axis Welding Clamp
Hobart 770565 Two Axis Welding Clamp - Features a floating head and rotating spindle screw that adjusts to align and hold work pieces. For welding perfect 90-degree corners on square tube, round tube and angle and channel iron.

 

IRWIN VISE-GRIP Original Locking Welding Clamp 9 25ZR
IRWIN VISE-GRIP Original Locking Welding Clamp, 9″, 25ZR
IRWIN VISE-GRIP Original Locking Welding Clamp, 9″, 25ZR - Holds work in proper alignment. Turn screw adjusts pressure to fit work and stays adjusted for repetitive use. U-shaped jaws provide enhanced visibility and more room to work. For use in welding applications and for holding awkward shapes in place. Constructed of high-grade heat-treated alloy steel for durability.

 

IRWIN Tools VISE-GRIP Locking C-Clamp Original 2-Piece Set 45619
IRWIN Tools VISE-GRIP Locking C-Clamp, Original, 2-Piece Set (45619)
IRWIN Tools VISE-GRIP Locking C-Clamp, Original, 2-Piece Set (45619) - Swivel pads hold tapered work, awkward fabricating jobs, and delicate projects without damaging the work surface. Versatile wide-opening jaws clamp a variety of shapes guarded trigger provides quick release while helping prevent accidental release. Adjust pressure and work fit with turn screw that stays adjusted for repetitive use. Locking clamp is constructed of high-grade heat-treated alloy steel for maximum toughness and durability.

 

CSI W35000 Tool Box Clamp
CSI W35000 Tool Box Clamp
CSI W35000 Tool Box Clamp - Avoid drilling your bed rails when mounting your toolbox by using a pair of csi tool box clamps.

 

KUNCAN Jumper Cables Jump Starter EC5 Connector Emergency Alligator Clamp Booster Battery Clips for Car
KUNCAN Jumper Cables Jump Starter EC5 Connector Emergency Alligator Clamp Booster Battery Clips for Car
KUNCAN Jumper Cables Jump Starter EC5 Connector Emergency Alligator Clamp Booster Battery Clips for Car - Use of car jump starter 1)- connect the red battery clamp of jumper cable to the vehicle’s positive (+) battery and connect the black to the negative (-) pole 2)- plug the cord of jumper cable into the jumper starter’s socket 3), and start the vehicle. Support up to 20000mah power bank at 600amp current (.

 

OTC 4724 Stinger Ear-type CV Boot Clamp Plier
OTC 4724 Stinger Ear-type CV Boot Clamp Plier
OTC 4724 Stinger Ear-type CV Boot Clamp Plier - Otc stinger ear-type cv boot clamp pliers special tips work on the ear-less type cv boot clamps. It grips clamp in many positions to tighten clamp around boot.